Quiet Operation
Grinding spiral bevel gear and Helical gears reduce vibration and noise.
High Rigidity and High Torque
High rigidity and high torque are achieved by integrant needle roller bearings and are one-piece constructed.
Grinding spiral bevel gear and Helical gears reduce vibration and noise.
High Rigidity and High Torque
High rigidity and high torque are achieved by integrant needle roller bearings and are one-piece constructed.
Unit of Measure
Specifications
Brands |
N/APelonis Technologies |
Model |
N/A180 |
Ratio |
N/A5 |
Output Bearing |
N/AStandard (Keyway) |
Stage |
N/A1-Stage |
Rated Output Torque (Nominal Output Torque) (T2N) |
N/A1050 N·m |
Maximum Acceleration Torque (T2B) |
N/A1890 N·m |
Maximum Output Torque (Emergency Stop Torque) (T2NOT) |
N/A3 Times of Rated Output Torque |
Rated Input Speed (n1N) |
N/A3000 rpm |
Maximum Input Speed (n1B) |
N/A5000 rpm |
Backlash |
N/A≤ 8 arc·min |
Torsional Rigidity |
N/A140 N·m/arc·min |
Maximum Radial Force (F2rB) |
N/A14800 N |
Maximum Axial Force (F2aB) |
N/A7400 N |
S5 Cycle Operation Service Life (LH) |
N/A>30000 hours |
S1 Continuous Operation Service Life (LH) |
N/A>15000 hours |
Efficiency (η) |
N/A≥ 97 % |
Operating Temperature |
N/A-25 to +90 ºC |
Lubrication |
N/ASynthetic Grease |
Protection Class |
N/AIngress Protection (IP65) |
Mounting Position |
N/AAny |
Noise Level |
N/A≤ 70 dB |
Weight |
N/A33公斤 |
Weight Tolerance (±) |
N/A2 % |
Mass Moments of Inertia |
N/A23.3 kg·cm² |
Dimensions
Dimension A1 |
N/A215 mm |
Dimension A2 |
N/AM14 x P2.0 |
Dimension A3 |
N/A55 mm |
Dimension A4 |
N/A160 mm |
Dimension A5 |
N/A9.5 mm |
Dimension A6 |
N/AM10 x P1.5 |
Dimension A7 |
N/A16 mm |
Dimension A8 |
N/A59 mm |
Dimension B1 |
N/A180 mm |
Dimension B2 |
N/A106 mm |
Dimension B3 |
N/A16 mm |
Dimension B4 |
N/A201.5 mm204.5 mm |
Dimension B5 |
N/A70 mm |
Dimension B6 |
N/A82 mm |
Dimension B7 |
N/A20 mm |
Dimension B8 |
N/A323.5 mm326.5 mm |
Dimension C1 |
N/A149 mm200 mm215 mm265 mm300 mm |
Dimension C2 |
N/AM8M12M16 |
Dimension C3 |
N/A38 mm42 mm48 mm55 mm |
Dimension C4 |
N/A114.5 mm117.5 mm |
Dimension C5 |
N/A114.3 mm180 mm230 mm250毫米 |
Dimension C6 |
N/AM10 x P1.5 |
Dimension C7 |
N/A182 mm200 mm250毫米265 mm |
Features
Features |
N/AHelical Gear Design The speed reduction mechanism employs helical gears and provides two times the meshing rate of teeth compared to regular spur gears. It also features extremely smooth operation, low noise, high torque output, and low backlash. High Precision Gear Machining Manufactured from high quality Ni-Cr-Mo alloy steel (SNCM220), precision machined and carbonized to hardness 57-60 HRC. Precision teeth grinding ensures gear accuracy reaches DIN6 class. Full Needle Roller Bearings Design The planetary gear transmission employs full needle roller bearings without a retainer to increase the contact surface. This greatly improves structural rigidity and service life. Integrated Planetary Arm Bracket 行星臂架和输出shaft are one-piece constructed to increase torsional rigidity and accuracy. One-piece Gear Box and Advanced Surface Treatment The gear box and the internal ring are one-piece constructed to achieve high rigidity and high torque. 夹头锁定机制 The input-end and the motor are coupled through a collet locking mechanism. The mechanism is dynamically balanced to ensure concentricity and balance on the connection and has no backlash for power transmission while running at a high speed. |