| Items |  MT Micro Temperature and Time Controller |
 DTC-S 4-Phase Temperature and Time Controller |
DTC-N Negative Temperature Coefficient (NTC) 4-Phase Temperature and Time Controller |
 DTC-A Digital Temperature and Time Controller |
 DTC-T AC to DC Digital Temperature and Time Controller |
|||||
| Description | The MT series Micro Temperature Controller's small, compact patented design provides a quick solution for implementing heating features into your existing applications without reorganizing circuit layouts. Its robust feature allows customized On/Off temperature as well as time interval settings with more than 10,000 available specifications. It can be used with Ultra-Thin Flexible Heaters and with products with limited space. | The DTC-S series 4-Phase Temperature and Time Controller uses Pulse Width Modulation (PWM) to control power input and provides four settings of 25%, 50%, 75%, and 100%. The output temperature varies depending on the heater device (power density). Time control can be set to 1, 2, 4, and 8 hours. It is small, lightweight, and easy to control and can be used with various heater products. | The DTC-N series NTC 4-Phase Temperature and Time Controller uses Pulse Width Modulation (PWM) to control power input and provides four temperatures of 40 ºC, 45 ºC, 50 ºC, 55 ºC. The temperature can be customized for each phase and time control can be set to 1, 2, 4, and 8 hours. It also uses an NTC device that can be used as a temperature sensor with precision of ±1 ºC. It is small, lightweight, and easy to control and can be used with various heater products. | The DTC-A series Temperature and Time Controller series is designed for more precise heating. The temperature can be controlled within 1 ºC of the set temperature from 1 to 150 ºC with a sampling rate at 100 ms. It can be used with Ultra-Thin Flexible Heaters and other heaters for lab testing, room heating, or end product temperature control. | The DTC-T series AC to DC Digital Temperature and Time Controller uses Pulse Width Modulation (PWM) to control power input, providing four settings of 25%, 50%, 75% and 100%. The temperature can be controlled within 1 ºC of the set temperature and the time/temperature can be customized and set to various levels. The output temperature varies depending on the heater device. It is small, lightweight, and easy to control. | |||||
| Type | Wired | Wired | Wired | TerminalWired | Wired | |||||
| Length | 25 mm0.98 in | 86 mm3.39 in | 86 mm3.39 in | 90 mm3.54 in | 147 mm5.78 in | |||||
| Width | 12 mm0.47 in | 50 mm1.97 in | 50 mm1.97 in | 65 mm2.56 in | 90 mm3.54 in | |||||
| Thickness | 5 mm0.19 in | |||||||||
| Height | 14 mm0.55 in | 14 mm0.55 in | 26 mm1.02 | 80 mm3.15 | ||||||
| Exterior Material | Polyolefin | Acrylonitrile Butadiene Styrene (ABS) | Acrylonitrile Butadiene Styrene (ABS) | Acrylonitrile Butadiene Styrene (ABS) | Acrylonitrile Butadiene Styrene (ABS) | |||||
| Input Voltage (DC) | Type A: 3.7 ~ 12 VType B: 12 ~ 24 V | Type A: 12 ~ 24 V | Type A: 12 ~ 24 V | Type A: 12 ~ 24 V | ||||||
| Input Voltage (AC) | Type B: 100 ~ 120 VType C: 200 ~ 240 V | Type B: 100 ~ 120 VType C: 200 ~ 240 V | Type B: 100 ~ 120 VType C: 200 ~ 240 V | 100 ~ 240 V | ||||||
| Output Voltage (DC) | Type A: 3.7 ~ 12 VType B: 12 ~ 24 V | Type A: 12 ~ 24 V | Type A: 12 ~ 24 V | Type A: 12 ~ 24 V | 24 V | |||||
| Output Voltage (AC) | Type B: 100 ~ 120 VType C: 200 ~ 240 V | Type B: 100 ~ 120 VType C: 200 ~ 240 V | Type B: 100 ~ 120 VType C: 200 ~ 240 V | |||||||
| Control Method | On/Off | |||||||||
| Frequency | 60 Hz50 Hz (Available upon request) | 60 Hz50 Hz (Available upon request) | 60 Hz50 Hz (Available upon request) | 50 Hz60 Hz | ||||||
| Maximum Current | 4 A (10 A within 30 sec) | 6 A (8 A within 1 minute) | ||||||||
| Maximum Current (DC) | ≤8 A | ≤8 A | ≤10 A | |||||||
| Maximum Current (AC) | ≤2 | ≤2 | ≤4 A | |||||||
| Maximum Current (Special) | 30 A | |||||||||
| Operating Temperature | -20 ~ 55 ºC-4 to 131 ºF | |||||||||
| Ambient Humidity | 0 ~ 80% RH | |||||||||
| Temperature Range | -30 ~ 120 ºC | 0 ~ 120 ºC32到248ºF | 0 ~ 150 ºC32 to 302 ºF | 0 ~ 150 ºC32 to 302 ºF | ||||||
| Setting/Indication Method | LED indicator | LED display | LED display | Front panel digital setting; LED display | Front panel digital setting; LED display | |||||
| Temperature (Power) Control | Customized temperature setting - in units of 1 ºCMaximum temperature: 120 ºC (standard)Maximum temperature: 150 ºC and 180 ºC (upon request) | Phase 1 to 4 (25%, 50%, 75%, 100% power inputs) | Standard 4 Phases Temperature Setting: Phase 1: 40 ºC/Phase 2: 45 ºC/Phase 3: 50 ºC/Phase 4: 55 ºC |
1 ~ 150 ºC (in units of 1 ºC) Allow customized temperature range: 0 ~ 60 ºC/-30 ~ 120 ºC/20 ~ 190 ºC |
1 ~ 150 ºC (in units of 1 ºC) Allow customized temperature range: 0 ~ 60 ºC/-30 ~ 120 ºC/20 ~ 190 ºC |
|||||
| Time Control | Continuous (Standard). Can also customize heating time period. | Phase 1 to 4 (1, 2, 4, 8 hours) | Phase 1 to 4 (1, 2, 4, 8 hours) | 1 ~ 99(以30分钟为单位or 1 hour)99 =连续 | 1 ~ 99(以30分钟为单位or 1 hour)99 =连续 | |||||
| Rotation Control | No rotation (standard). Can also customize rotation settings. | |||||||||
| Power Memory | EEPROM | EEPROM | EEPROM | EEPROM | ||||||
| Sampling Rate | <100 ms | <100 ms | <100 ms | <100 ms | ||||||
| Negative Temperature Coefficient (NTC) | Use Negative Temperature Coefficient (NTC) as temperature sensor (Non-insulated) | Use Negative Temperature Coefficient (NTC) as temperature sensor (Non-insulated) | Use Negative Temperature Coefficient (NTC) as temperature sensor (Non-insulated) | Use Negative Temperature Coefficient (NTC) as temperature sensor (Non-insulated) | ||||||
| Negative Temperature Coefficient (NTC) Precision | 20.ºC ~ 60 ºC ±1 ºC; Other temperatures 2 ºC | 20.ºC ~ 60 ºC ±1 ºC; Other temperatures 2 ºC | 20.ºC ~ 60 ºC ±1 ºC; Other temperatures 2 ºC | 20.ºC ~ 60 ºC ±1 ºC; Other temperatures 2 ºC | ||||||
| Features |
|
|
|
|
|
|||||
| Note | Other temperature ranges can be customized. | Temperature for each phase can be customized. Requires special order. |
||||||||
|
|
||||||||||
