请求信息
ptC has a unique heating property that allows the PTC heat output to be regulated by the airflow applied. The higher the airflow, the higher the heat output and power (wattage). Therefore, depending on the end design, if the ambient temperature is high, the PTC output power will decrease; if the airflow is high with low ambient temperature, then the PTC output power will increase.
测量单位

Specifications

Brands

 N/APelonis Technologies

Type

 N/ATerminal

Length (L)

 N/A93 mm

Length (L1)

 N/A106毫米

额定电压

 N/A120 V

Maximum Voltage

 N/A135 V

Maximum Inrush Current

 N/A15 a

空气Speed

 N/A6.4 m/s

Power at 6.4 Meter Per Second (m/s) Air Speed and 20 Degree (º) Celsius Temperature

 N/A1000 Watts

Tolerance for Power at 6.4 Meter Per Second (m/s) Air Speed and 20 Degree (º) Celsius Temperature (±)

 N/A9％

Power at 6.4 Meter Per Second (m/s) Air Speed and 0 Degree (º) Celsius Temperature

 N/A1100 Watts

耐力以每秒6.4米（m/s）的空气速度和0度（º）摄氏度（±）的耐受性（±）

 N/A9％

Available Frames

 N/AMHF-90MHF-93

Intended Application

 N/A空气

管数

 N/A23

鳍宽度

 N/A90 mm

General Specifications

行业标准/认证

 N/ACE Recognized Reach Compliantcrug®us认可CSA符合危险物质（ROHS）的限制Underwriters Laboratories (UL)

Fin Pitch

 N/A2.0 mm2.6毫米

Voltage

 N/AAC/DC都可用。请参阅零件编号的电压范围（用于汽车使用12V〜520V）。

Power

 N/A50˜2000 Watts

Exemptions

 N/A我们的PTC元素包含Pb RoHS豁免7下(c)-I : Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound.

设计考虑

电源

 N/APositive (+) and negative (-) inputs on either side

Wiring

 N/AWires with female terminals required
选项：单阶段/多阶段电源设置接线

标准帧

 N/AAvailable

配件

 N/AAvailable

限制

 N/ANo current and power (W) limitations

Suitable Applications

 N/A
  • 最适合不限于单侧的电源连接的标准应用。
  • Vast scope of heating applications.

Heater Type

 N/APositive Temperature Coefficient (PTC)

电压选择

 N/A
  • Standard voltages: 100V~120V and 200V~240V
  • For all other voltage range requirements, please contact us for additional information.

Application Note for Voltage Selection

 N/A
  • 在恒定的气流下，电压增加对加热器功率的影响很小。

Positive Temperature Coefficient (PTC) Power (W) and Air Flow/Air Speed Considerations

 N/A
  • 高空速度与高热量耗散速率相关，这会导致更高的功率和周围温度更快的升高。
  • Under low air speed, heater power will decrease, however the temperature at the air outlet will be high.
  • 在没有气流的情况下，PTC Fins的表面将接近Curie温度。加热器功率可能会降至正常功率的1/20（以6.4m/s的空气速度），并在恒定温度下稳定。

申请注意积极Temperature Coefficient (PTC) Power (W) and Air Flow/Air Speed Considerations

 N/A
  • The power of PTC heaters is related to the ambient thermal condition and the heat dissipation rate of the heater. When the ambient temperature is significantly higher than the reference temperature or when heat transfer is restricted, the resistance of the PTC will rise rapidly and power consumption reduces. Hence, the higher the heat dissipation, the higher the output power.
  • The surface temperature of PTC is self regulated. The lower the surface temperature, the lower the power.
  • The MH and MSH type Fin PTC Air Heaters allow three stage temperature settings (high, medium, low). The PTC heater tubes can be controlled independently (please see the "Installation" section for circuit connection), effectively reducing electricity cost and increasing product life. If this function is used in conjunction with air speed adjustment (fans), it will allow more flexibility in the adjustment of air flow and temperature.

Positive Temperature Coefficient (PTC) Fin Pitch Selection

 N/A
  • Unique Fin PTC pitch range provides a diverse choice of high efficiency vs low air resistance (lower noise level). Choices from 1.2 mm to 2.6 mm are available for various application selections.
    • Ultra-high-heating-efficiency Fin Pitch: 1.2 mm (S), 1.68 mm (M) Larger heat dissipation area; higher output power; higher temperature at the air outlet.
    • Ultra-low-air resistance (lower noise level) Fin Pitch: 2.0 mm (N), 2.6 mm (B) Less heat dissipation area; projects heat further; lower output power.
  • 规格表中的功率（W）基于具有超高效率鳍的鳍PTC空气加热器。MSH，SH和OH型号的鳍螺距1.68毫米（M），MH型号为1.2 mm（S）。
  • The Power (W) of Fin PTC Air Heater with fin pitch 2.0 mm (N) is 95% of Fin PTC Air Heater with fin pitch 1.2 mm (S).
  • The Power (W) of Fin PTC Air Heater with fin pitch 2.6 mm (B) is 90% of Fin PTC Air Heater with fin pitch 1.2 mm (S).
  • The Power (W) of PFin PTC Air Heater with fin pitch 2.6 mm (B) is 90% of Fin PTC Air Heater with fin pitch 1.68 mm (M).

Positive Temperature Coefficient (PTC) Insulation Consideration (Doubled Insulation - Electrically Insulated Heater)

 N/A
  • The Power (W) in the "Standard" tables is based on Fin PTC Air Heaters with Single Insulation (S).
  • 具有双绝缘材料（D）的FIN PTC空气加热器的功率（W）比带有单个绝缘的FIN PTC空气加热器低约10％。
  • The price of Fin PTC Air Heaters with double insulation (D) is 15~30% more than single insulation (S) Fin PTC Air Heaters.
  • 双绝缘鳍PTC空气加热器设计用于在需要电气隔热的加热器外部（FINS）的情况下使用。
  • Both single insulated and glued typed Fin PTC Air Heaters are not electrically insulated on the heater exterior/fins, hence carrying input voltage.
  • 双鳍PTC发热元件的绝缘Fin PTC Air Heaters are completely insulated within the aluminum tubes, allowing complete electric insulation on the heater exterior (fins).

申请注意积极Temperature Coefficient (PTC) Insulation Consideration (Doubled Insulation - Electrically Insulated Heater)

 N/A
  • The fins on Fin PTC Air Heaters with Double Insulation (D) are electrically insulated. This is suitable for applications where the device may be in contact with other conductive materials (eg. metal); expose to high humidity; with shock resistance requirement; or in products that require superior stability and quality (eg. automobiles).
  • Due to its high safety and reliability performance, double insulated Fin PTC Air Heaters are mainly used by automobiles, electric vehicles, in large-power house heaters such as cold/warm air-conditioners, fan heaters, disinfecting cabinets, dryers and many more.

Dimensions

宽度

 N/A90 mm

Thickness

 N/A26毫米

Special Length (L)

 N/A225 mm268 mm314毫米358毫米403 mm446 mm492 mm

Overview

Overview

 N/A金宝搏官网mgPelonis Technologies的创新鳍PTC空气加热器比线圈或常规加热器高得多，并在小空间中产生非常有效的传热。

Positive Temperature Coefficient (PTC) Characteristics

Positive Temperature Coefficient (PTC) Characteristics

 N/AFin PTC Air Heaters have self-regulating characteristics and will not overheat. This results in better conductivity, greater operating efficiency, a stable electronic response, and longer life expectancy.

创新功能

创新功能

 N/A
  • Available designs include very low air resistance and high heating efficiency.
  • 内部安全局部保护；自动切割以防止异常高电流或其他外部因素引起安全问题。
  • Fast thermal response time and low inrush current; will not cause sparks or flame by instant/sudden power supply variations or when in contact with flammable objects including matches, cotton, paper, etc.
  • Designed with single or double insulation; when in contact with metallic objects, will not cause electric shock or short circuit.
  • 双绝缘PTC可以在水下使用，而不会导致电力泄漏或短路（自定义）。
  • 允许独立控制单个PTC（500W，800W），双PTC（1000W，1500W）或三重PTC（1500W，2000W）加热管；降低电力成本并延长产品寿命。
  • The poles and terminals are connected by point welding, thereby preventing the electrodes from loosening and causing resistance and temperature to increase due to cold contraction or heat inflation.
  • The heating components are tightly sealed and the electrodes are unexposed which makes Fin PTC Air Heaters suitable for applications in bathrooms or high humidity environments.
  • Long service life; do not crack, burst, or burn even when heated under no airflow conditions.
  • No moving parts to wear out.
  • Voltage change does not affect its current and output power (insensitive to unstable voltage).
  • The surface temperature of the PTC pellets does not change while power regulates with ambient temperature and heat dissipation rate. Therefore, the higher the environmental temperature, the greater the power efficiency.
  • 加热power (W) and self-regulating function is in correlation to the heat dissipation rate.

Added Protection

Added Protection

 N/AThe internal heating elements are fully cladded in a sturdy aluminum structure in order to reduce exposure to air and to withstand high levels of humidity and vibration. This method of protection also prevents loosening of the individual heating pellets and eliminates oxidation which can lead to eventual power reduction and shorter life expectancy.

Customized Solutions

Customized Solutions

 N/AFIN PTC空气加热器可以根据客户需求提供各种尺寸，还可以配置外部框架，恒温器，保险丝，轴向冷却风扇和防护罩，以提供完整的单源组件解决方案。金宝搏188是什么公司188体育在线官方188d金宝搏的网址

Applications

Applications

 N/AFIN PTC空气加热器可用于汽车（电动汽车）和其他应用，用于加热，除湿和耐热率，或者在一般的电子设备中，包括手工烘干机，空调，熨斗，层压机和胶粘剂密封机。其他应用程序包括冻结对室外监视摄像机，3C产品和其他电子设备的保护。

附加信息

附加信息

 N/AStandard Fin PTC Air Heaters are designed with single stage heating (full power). However, MH type Fin PTC Air Heaters can be designed with multiple power stages by heating one, two, or all three tubes at a time. This makes them more economical through power saving and will also help extend heater life expectancy.

Note

Note

 N/A
  • This is a standard model. The delivery time for these model is shorter and may have a lower cost.
  • The Power (W) in the Specifications table is based on Fin PTC Air Heaters with Single Insulation (S) and fin pitch of 2.0mm (N). Please refer to Notes on Part Numbering for the difference in Power (W) efficiency for different insulation type.
  • Customized wattage, length and specifications can also be designed for large quantities.