PTC具有独特的加热特性,可以通过施加的气流调节PTC热量输出。气流越高,热量输出和功率(瓦数)越高。因此,根据最终设计的不同,如果环境温度较高,则PTC输出功率将降低;如果气流较高,环境温度较低,则PTC输出功率将增加。
Unit of Measure

规格

Brands

N/A。金宝搏官网mgPelonis技术

Type

N/A。有线

长度(L)

N/A。93 mm

长度(L1)

N/A。106毫米

额定电压

N/A。220 V

Maximum Voltage

N/A。260 V

最大灌溉电流

N/A。6 A

Air Speed

N/A。6.4 m/s

力量at 6.4 Meter Per Second (m/s) Air Speed and 20 Degree (º) Celsius Temperature

N/A。600 Watts

Tolerance for Power at 6.4 Meter Per Second (m/s) Air Speed and 20 Degree (º) Celsius Temperature (±)

N/A。10%

力量at 6.4 Meter Per Second (m/s) Air Speed and 0 Degree (º) Celsius Temperature

N/A。700瓦

Tolerance for Power at 6.4 Meter Per Second (m/s) Air Speed and 0 Degree (º) Celsius Temperature (±)

N/A。9 %

Available Frames

N/A。MHF-90MSHF-93

Intended Application

N/A。Air

Number of Tubes

N/A。23

Fin Width

N/A。90毫米

General Specifications

Industry Standards/Certifications

N/A。CE认识到符合范围CRU®US RecognizedCSARestriction of Hazardous Substances (RoHS) CompliantUnderwriters Laboratories (UL)

鳍螺距

N/A。1.2 mm2.0毫米

Voltage

N/A。AC/DC都可用。请参阅零件编号的电压范围(用于汽车使用12V〜520V)。

力量

N/A。50˜2000 Watts

豁免

N/A。Our PTC elements contain Pb under RoHS exemption 7(c)-I : Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound.

Design Consideration

力量In

N/A。单面正(+)和负( - )输入

接线

N/A。Can be connected to power directly
需要自定义

Standard Frames

N/A。Available

Limitations

N/A。≤15 A≤1800瓦

合适的申请

N/A。
  • Most suitable for applications where power connection is fixed on a single side.
  • Better vibration endurance for automotive. Prevents loose connection or poor contact between terminals. Reduces the possibility of oxidation of connection points between male and female terminals causing increase in resistance leading to overheated joints and vibration failure.
  • Additional silicon seal can be added for applications located in high humidity environments. Effectively increases the life-span of the PTC.

加热器类型

N/A。正温系数(PTC)

电压选择

N/A。
  • 标准电压:100V〜120V和200V〜240V
  • For all other voltage range requirements, please contact us for additional information.

电压选择的申请注释

N/A。
  • Under constant airflow, increase in voltage will have little effect on the heater power.

正温系数(PTC)力量(W) and Air Flow/Air Speed Considerations

N/A。
  • High air speed is correlated with high heat dissipation rate which results in higher power and a more rapid increase of the surrounding temperature.
  • Under low air speed, heater power will decrease, however the temperature at the air outlet will be high.
  • Under no airflow, the surface of the PTC fins will approach Curie temperature. The heater power may drop to 1/20 of normal power (at air speed of 6.4m/s) and stabilizes at a constant temperature.

正温系数(PTC)功率(W)和空气流量/空气速度注意事项的申请注释

N/A。
  • The power of PTC heaters is related to the ambient thermal condition and the heat dissipation rate of the heater. When the ambient temperature is significantly higher than the reference temperature or when heat transfer is restricted, the resistance of the PTC will rise rapidly and power consumption reduces. Hence, the higher the heat dissipation, the higher the output power.
  • The surface temperature of PTC is self regulated. The lower the surface temperature, the lower the power.
  • 要看更多有关憩苑MH和鳍型PTC空气加热器允许3个e stage temperature settings (high, medium, low). The PTC heater tubes can be controlled independently (please see the "Installation" section for circuit connection), effectively reducing electricity cost and increasing product life. If this function is used in conjunction with air speed adjustment (fans), it will allow more flexibility in the adjustment of air flow and temperature.

正温系数(PTC)鳍螺距Selection

N/A。
  • Unique Fin PTC pitch range provides a diverse choice of high efficiency vs low air resistance (lower noise level). Choices from 1.2 mm to 2.6 mm are available for various application selections.
    • Ultra-high-heating-efficiency Fin Pitch: 1.2 mm (S), 1.68 mm (M) Larger heat dissipation area; higher output power; higher temperature at the air outlet.
    • Ultra-low-air resistance (lower noise level) Fin Pitch: 2.0 mm (N), 2.6 mm (B) Less heat dissipation area; projects heat further; lower output power.
  • The Power (W) in the Specifications tables is based on Fin PTC Air Heaters with extra-high efficiency fin pitches. Fin pitch 1.68 mm (M) for MSH, SH and OH models, and fin pitch 1.2 mm (S) for MH model.
  • Fin Pitch 2.0 mm(N)的Fin PTC空气加热器的功率(W)为鳍PTC空气加热器的95%,鳍螺距1.2毫米(S)。
  • The Power (W) of Fin PTC Air Heater with fin pitch 2.6 mm (B) is 90% of Fin PTC Air Heater with fin pitch 1.2 mm (S).
  • PIFIN PTC空气加热器的功率(W)为2.6毫米(B)的功率是Fin PTC空气加热器的90%,鳍螺距为1.68毫米(m)。

阳性温度系数(PTC)绝缘考虑(隔热倍增 - 电气绝缘加热器)

N/A。
  • “标准”表中的功率(W)基于具有单个绝缘材料的FIN PTC空气加热器。
  • The Power (W) of Fin PTC Air Heaters with double insulation (D) is approximately 10% less than Fin PTC Air Heater with single insulation (S).
  • The price of Fin PTC Air Heaters with double insulation (D) is 15~30% more than single insulation (S) Fin PTC Air Heaters.
  • Double insulated Fin PTC Air Heaters are designed for use where heater exterior (fins) needs to be electrically insulated.
  • 单个绝缘和胶合的鳍PTC空气加热器均未在加热器的外部/鳍上进行电隔热,因此携带输入电压。
  • 双绝缘鳍PTC空气加热器的FIN PTC加热元件完全绝缘在铝管内,从而使加热器外部(FIN)完全绝缘。

阳性温度系数(PTC)绝缘考虑的申请注释(隔热倍增 - 电气绝缘加热器)

N/A。
  • 带有双绝缘材料(D)的FIN PTC空气加热器上的鳍片是电气绝缘的。这适用于该设备可能与其他导电材料(例如金属)接触的应用;暴露于高湿度;有阻力要求;或在需要卓越稳定性和质量的产品中(例如汽车)。
  • Due to its high safety and reliability performance, double insulated Fin PTC Air Heaters are mainly used by automobiles, electric vehicles, in large-power house heaters such as cold/warm air-conditioners, fan heaters, disinfecting cabinets, dryers and many more.

方面

Width

N/A。90毫米

厚度

N/A。26毫米

特殊长度(L)

N/A。225 mm268毫米314 mm358 mm403毫米446 mm492 mm

Overview

Overview

N/A。金宝搏官网mgPelonis Technologies的创新鳍PTC空气加热器比线圈或常规加热器高得多,并在小空间中产生非常有效的传热。

正温系数(PTC)Characteristics

正温系数(PTC)Characteristics

N/A。FIN PTC空气加热器具有自我调节的特征,不会过热。这会导致更高的电导率,更高的工作效率,稳定的电子响应以及更长的预期寿命。

Innovative Features

Innovative Features

N/A。
  • 可用的设计包括非常低的空气阻力和高加热效率。
  • 内部安全局部保护;自动切割以防止异常高电流或其他外部因素引起安全问题。
  • Fast thermal response time and low inrush current; will not cause sparks or flame by instant/sudden power supply variations or when in contact with flammable objects including matches, cotton, paper, etc.
  • Designed with single or double insulation; when in contact with metallic objects, will not cause electric shock or short circuit.
  • Double insulated PTC can be used underwater without causing electricity leakage or short circuit (customized).
  • Allows for independent control of single PTC (500W, 800W), double PTC (1000W, 1500W) or triple PTC (1500W, 2000W) heating tubes; reduces electricity cost and extends product life.
  • 两极和末端通过点焊接连接,从而防止电极松动并导致电阻和温度由于冷收缩或热充气而增加。
  • The heating components are tightly sealed and the electrodes are unexposed which makes Fin PTC Air Heaters suitable for applications in bathrooms or high humidity environments.
  • Long service life; do not crack, burst, or burn even when heated under no airflow conditions.
  • No moving parts to wear out.
  • 电压变化不会影响其当前和输出功率(对不稳定电压不敏感)。
  • The surface temperature of the PTC pellets does not change while power regulates with ambient temperature and heat dissipation rate. Therefore, the higher the environmental temperature, the greater the power efficiency.
  • 加热能力(W)和自我调节功能与散热速度相关。

增加了保护

增加了保护

N/A。内部加热元件完全覆盖在坚固的铝结构中,以减少暴露于空气并承受高水平的湿度和振动。这种保护方法还防止了单个加热颗粒的松动并消除氧化,这可能导致最终降低功率和预期寿命较短。

定制解决方案

定制解决方案

N/A。鳍各siz PTC加热器空气供应es based on customer requirements and can also be configured with outer frames, thermostats, fuses, axial cooling fans, and protective shields to provide a complete single source assembly solution.

Applications

Applications

N/A。FIN PTC空气加热器can be used in automotive (electric vehicles) and other applications for heating, dehumidifying, and thermal retention or in general electronic appliances including hand dryers, air conditioners, irons, laminating machines, and adhesive sealing machines. Additional applications include freeze protection of outdoor surveillance cameras, 3C products, and other electronic devices.

Additional Information

Additional Information

N/A。Standard Fin PTC Air Heaters are designed with single stage heating (full power). However, MH type Fin PTC Air Heaters can be designed with multiple power stages by heating one, two, or all three tubes at a time. This makes them more economical through power saving and will also help extend heater life expectancy.

笔记

笔记

N/A。
  • The Power (W) in the Specifications table is based on Fin PTC Air Heaters with Single Insulation (S) and fin pitch of 2.0 mm (N). Please refer to Notes on Part Numbering for the difference in Power (W) efficiency for different insulation type.
  • Customized wattage, length and specifications can also be designed for large quantities.