电源 |
N/A两侧的正(+)和负( - )输入 |
Wiring |
N/AWires with female terminals required 选项:单阶段/多阶段电源设置接线 |
标准帧 |
N/A可用的 |
配件 |
N/A可用的 |
限制 |
N/ANo current and power (W) limitations |
Suitable Applications |
N/A
- 最适合不限于单侧的电源连接的标准应用。
- Vast scope of heating applications.
|
Heater Type |
N/A正温系数(PTC) |
电压选择 |
N/A
- 标准电压:100V〜120V和200V〜240V
- For all other voltage range requirements, please contact us for additional information.
|
Application Note for Voltage Selection |
N/A
|
正温系数(PTC)力量(W) and Air Flow/Air Speed Considerations |
N/A
- 高空速度与高热量耗散速率相关,这会导致更高的功率和周围温度更快的升高。
- 在低空速度下,加热器功率将降低,但是空气插座的温度将很高。
- 在没有气流的情况下,PTC Fins的表面将接近Curie温度。加热器功率可能会降至正常功率的1/20(以6.4m/s的空气速度),并在恒定温度下稳定。
|
正温系数(PTC)功率(W)和空气流量/空气速度注意事项的申请注释 |
N/A
- The power of PTC heaters is related to the ambient thermal condition and the heat dissipation rate of the heater. When the ambient temperature is significantly higher than the reference temperature or when heat transfer is restricted, the resistance of the PTC will rise rapidly and power consumption reduces. Hence, the higher the heat dissipation, the higher the output power.
- The surface temperature of PTC is self regulated. The lower the surface temperature, the lower the power.
- MH和MSH型FIN PTC空气加热器允许三个阶段温度设置(高,中,低)。可以独立控制PTC加热器管(请参阅“安装”部分以获取电路连接),有效地降低了电力成本并增加了产品寿命。如果此功能与空气速度调节(风扇)结合使用,则可以在调节气流和温度方面更灵活。
|
正温系数(PTC)Fin Pitch Selection |
N/A
- Unique Fin PTC pitch range provides a diverse choice of high efficiency vs low air resistance (lower noise level). Choices from 1.2 mm to 2.6 mm are available for various application selections.
- Ultra-high-heating-efficiency Fin Pitch: 1.2 mm (S), 1.68 mm (M) Larger heat dissipation area; higher output power; higher temperature at the air outlet.
- Ultra-low-air resistance (lower noise level) Fin Pitch: 2.0 mm (N), 2.6 mm (B) Less heat dissipation area; projects heat further; lower output power.
- 规格表中的功率(W)基于具有超高效率鳍的鳍PTC空气加热器。MSH,SH和OH型号的鳍螺距1.68毫米(M),MH型号为1.2 mm(S)。
- The Power (W) of Fin PTC Air Heater with fin pitch 2.0 mm (N) is 95% of Fin PTC Air Heater with fin pitch 1.2 mm (S).
- The Power (W) of Fin PTC Air Heater with fin pitch 2.6 mm (B) is 90% of Fin PTC Air Heater with fin pitch 1.2 mm (S).
- PIFIN PTC空气加热器的功率(W)为2.6毫米(B)的功率是Fin PTC空气加热器的90%,鳍螺距为1.68毫米(m)。
|
阳性温度系数(PTC)绝缘考虑(隔热倍增 - 电气绝缘加热器) |
N/A
- The Power (W) in the “Standard” tables is based on Fin PTC Air Heaters with Single Insulation (S).
- 具有双绝缘材料(D)的FIN PTC空气加热器的功率(W)比带有单个绝缘的FIN PTC空气加热器低约10%。
- The price of Fin PTC Air Heaters with double insulation (D) is 15~30% more than single insulation (S) Fin PTC Air Heaters.
- 双绝缘鳍PTC空气加热器设计用于在需要电气隔热的加热器外部(FINS)的情况下使用。
- 单个绝缘和胶合的鳍PTC空气加热器均未在加热器的外部/鳍上进行电隔热,因此携带输入电压。
- 双鳍PTC发热元件的绝缘Fin PTC Air Heaters are completely insulated within the aluminum tubes, allowing complete electric insulation on the heater exterior (fins).
|
阳性温度系数(PTC)绝缘考虑的申请注释(隔热倍增 - 电气绝缘加热器) |
N/A
- 带有双绝缘材料(D)的FIN PTC空气加热器上的鳍片是电气绝缘的。这适用于该设备可能与其他导电材料(例如金属)接触的应用;暴露于高湿度;有阻力要求;或在需要卓越稳定性和质量的产品中(例如汽车)。
- Due to its high safety and reliability performance, double insulated Fin PTC Air Heaters are mainly used by automobiles, electric vehicles, in large-power house heaters such as cold/warm air-conditioners, fan heaters, disinfecting cabinets, dryers and many more.
|