PTC具有独特的热特性,可以通过施加的气流调节PTC热量输出。气流越高,热量输出和功率(瓦数)越高。因此,根据最终设计的不同,如果环境温度较高,则PTC输出功率将降低;如果气流较高,环境温度较低,则PTC输出功率将增加。
Unit of Measure

规格

Brands

N/A金宝搏官网mgPelonis技术

Type

N/A有线

长度(L)

N/A180毫米

Length (L1)

N/A196 mm

Rated Voltage

N/A220 v

Maximum Voltage

N/A260 V

Maximum Inrush Current

N/A7 A

Air Speed

N/A6.4 m/s

力量at 6.4 Meter Per Second (m/s) Air Speed and 20 Degree (º) Celsius Temperature

N/A700 Watts

Tolerance for Power at 6.4 Meter Per Second (m/s) Air Speed and 20 Degree (º) Celsius Temperature (±)

N/A9 %

力量at 6.4 Meter Per Second (m/s) Air Speed and 0 Degree (º) Celsius Temperature

N/A750 Watts

Tolerance for Power at 6.4 Meter Per Second (m/s) Air Speed and 0 Degree (º) Celsius Temperature (±)

N/A9 %

Available Frames

N/AMHF-90

Intended Application

N/AAir

Number of Tubes

N/A3

Fin Width

N/A65 mm

General Specifications

Industry Standards/Certifications

N/ACE Recognized Reach CompliantcrU®US RecognizedCSARestriction of Hazardous Substances (RoHS) Compliant承销商实验室(UL)

Fin Pitch

N/A2.6 mm

Voltage

N/ABoth AC/DC available. Please refer to Part Numbering for voltage ranges (for automotive use 12V˜520V).

力量

N/A50˜2000 Watts

Exemptions

N/AOur PTC elements contain Pb under RoHS exemption 7(c)-I : Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound.

方面

Width

N/A65 mm

厚度

N/A26 mm

Special Length (L)

N/A225 mm268 mm314 mm358 mm403 mm446 mm492 mm

Design Consideration

力量In

N/ASingle sided Positive (+) and negative (-) inputs

Wiring

N/A可以直接连接到电力
需要自定义

Standard Frames

N/AAvailable

Limitations

N/A≤15 A≤1800 Watts

Suitable Applications

N/A
  • Most suitable for applications where power connection is fixed on a single side.
  • 汽车的更好振动耐力。防止连接松动或终端之间的接触不良。降低了男性和女性末端之间连接点的氧化可能性,从而导致电阻增加,导致关节过热和振动失败。
  • Additional silicon seal can be added for applications located in high humidity environments. Effectively increases the life-span of the PTC.

Heater Type

N/A正温系数(PTC)

Voltage Selection

N/A
  • 标准电压:100V〜120V和200V〜240V
  • For all other voltage range requirements, please contact us for additional information.

Application Note for Voltage Selection

N/A
  • Under constant airflow, increase in voltage will have little effect on the heater power.

正温系数(PTC)力量(W) and Air Flow/Air Speed Considerations

N/A
  • High air speed is correlated with high heat dissipation rate which results in higher power and a more rapid increase of the surrounding temperature.
  • 在低空速度下,加热器功率将降低,但是空气插座的温度将很高。
  • Under no airflow, the surface of the PTC fins will approach Curie temperature. The heater power may drop to 1/20 of normal power (at air speed of 6.4 m/s) and stabilizes at a constant temperature.

正温系数(PTC)功率(W)和空气流量/空气速度注意事项的申请注释

N/A
  • The power of PTC heaters is related to the ambient thermal condition and the heat dissipation rate of the heater. When the ambient temperature is significantly higher than the reference temperature or when heat transfer is restricted, the resistance of the PTC will rise rapidly and power consumption reduces. Hence, the higher the heat dissipation, the higher the output power.
  • The surface temperature of PTC is self regulated. The lower the surface temperature, the lower the power.
  • MH和MSH型FIN PTC空气加热器允许三个阶段温度设置(高,中,低)。可以独立控制PTC加热器管(请参阅“安装”部分以获取电路连接),有效地降低了电力成本并增加了产品寿命。如果此功能与空气速度调节(风扇)结合使用,则可以在调节气流和温度方面更灵活。

正温系数(PTC)Fin Pitch Selection

N/A
  • Unique Fin PTC pitch range provides a diverse choice of high efficiency vs low air resistance (lower noise level). Choices from 1.2 mm to 2.6 mm are available for various application selections.
    • Ultra-high-heating-efficiency Fin Pitch: 1.2 mm (S), 1.68 mm (M) Larger heat dissipation area; higher output power; higher temperature at the air outlet.
    • Ultra-low-air resistance (lower noise level) Fin Pitch: 2.0 mm (N), 2.6 mm (B) Less heat dissipation area; projects heat further; lower output power.
  • The Power (W) in the Specifications tables is based on Fin PTC Air Heaters with extra-high efficiency fin pitches. Fin pitch 1.68 mm (M) for MSH, SH and OH models, and fin pitch 1.2 mm (S) for MH model.
  • The Power (W) of Fin PTC Air Heater with fin pitch 2.0 mm (N) is 95% of Fin PTC Air Heater with fin pitch 1.2 mm (S).
  • The Power (W) of Fin PTC Air Heater with fin pitch 2.6 mm (B) is 90% of Fin PTC Air Heater with fin pitch 1.2 mm (S).
  • PIFIN PTC空气加热器的功率(W)为2.6毫米(B)的功率是Fin PTC空气加热器的90%,鳍螺距为1.68毫米(m)。

阳性温度系数(PTC)绝缘考虑(隔热倍增 - 电气绝缘加热器)

N/A
  • The Power (W) in the "Standard" tables is based on Fin PTC Air Heaters with Single Insulation (S).
  • The Power (W) of Fin PTC Air Heaters with double insulation (D) is approximately 10% less than Fin PTC Air Heater with single insulation (S).
  • 翅片空气PTC加热器的价格double insulation (D) is 15~30% more than single insulation (S) Fin PTC Air Heaters.
  • Double insulated Fin PTC Air Heaters are designed for use where heater exterior (fins) needs to be electrically insulated.
  • 单个绝缘和胶合的鳍PTC空气加热器均未在加热器的外部/鳍上进行电隔热,因此携带输入电压。
  • The Fin PTC heating elements of double insulated Fin PTC Air Heaters are completely insulated within the aluminum tubes, allowing complete electric insulation on the heater exterior (fins).

阳性温度系数(PTC)绝缘考虑的申请注释(隔热倍增 - 电气绝缘加热器)

N/A
  • 带有双绝缘材料(D)的FIN PTC空气加热器上的鳍片是电气绝缘的。这适用于该设备可能与其他导电材料(例如金属)接触的应用;暴露于高湿度;有阻力要求;或在需要卓越稳定性和质量的产品中(例如汽车)。
  • Due to its high safety and reliability performance, double insulated Fin PTC Air Heaters are mainly used by automobiles, electric vehicles, in large-power house heaters such as cold/warm air-conditioners, fan heaters, disinfecting cabinets, dryers and many more.

Overview

Overview

N/A金宝搏官网mgPelonis技术' innovative Fin PTC Air Heaters are significantly more efficient than coil or conventional heaters and create a very effective heat transfer in a small space.

正温系数(PTC)Characteristics

正温系数(PTC)Characteristics

N/AFin PTC Air Heaters have self-regulating characteristics and will not overheat. This results in better conductivity, greater operating efficiency, a stable electronic response, and longer life expectancy.

Innovative Features

Innovative Features

N/A
  • Available designs include very low air resistance and high heating efficiency.
  • 内部保险丝保护;auto-cut-off prevent abnormal high current or other external factors causing safety concerns.
  • Fast thermal response time and low inrush current; will not cause sparks or flame by instant/sudden power supply variations or when in contact with flammable objects including matches, cotton, paper, etc.
  • Designed with single or double insulation; when in contact with metallic objects, will not cause electric shock or short circuit.
  • Double insulated PTC can be used underwater without causing electricity leakage or short circuit (customized).
  • Allows for independent control of single PTC (500W, 800W), double PTC (1000W, 1500W) or triple PTC (1500W, 2000W) heating tubes; reduces electricity cost and extends product life.
  • 两极和末端通过点焊接连接,从而防止电极松动并导致电阻和温度由于冷收缩或热充气而增加。
  • The heating components are tightly sealed and the electrodes are unexposed which makes Fin PTC Air Heaters suitable for applications in bathrooms or high humidity environments.
  • Long service life; do not crack, burst, or burn even when heated under no airflow conditions.
  • 没有运动部件要磨损。
  • Voltage change does not affect its current and output power (insensitive to unstable voltage).
  • The surface temperature of the PTC pellets does not change while power regulates with ambient temperature and heat dissipation rate. Therefore, the higher the environmental temperature, the greater the power efficiency.
  • 加热能力(W)和自我调节功能与散热速度相关。

Added Protection

Added Protection

N/A内部加热元件完全覆盖在坚固的铝结构中,以减少暴露于空气并承受高水平的湿度和振动。这种保护方法还防止了单个加热颗粒的松动并消除氧化,这可能导致最终降低功率和预期寿命较短。

Customized Solutions

Customized Solutions

N/AFin PTC Air Heaters can be supplied in various sizes based on customer requirements and can also be configured with outer frames, thermostats, fuses, axial cooling fans, and protective shields to provide a complete single source assembly solution.

申请

申请

N/AFin PTC Air Heaters can be used in automotive (electric vehicles) and other applications for heating, dehumidifying, and thermal retention or in general electronic appliances including hand dryers, air conditioners, irons, laminating machines, and adhesive sealing machines. Additional applications include freeze protection of outdoor surveillance cameras, 3C products, and other electronic devices.

Additional Information

Additional Information

N/AStandard Fin PTC Air Heaters are designed with single stage heating (full power). However, SH type Fin PTC Air Heaters can be designed with multiple power stages by heating one or two tubes at a time. This makes them more economical through power saving and will also help extend heater life expectancy. If multiple stage heating is required in an application design, please contact our Sales Representatives in advance for special design and wiring.

笔记

笔记

N/A
  • The Power (W) in the Specifications table is based on Fin PTC Air Heaters with Single Insulation (S) and fin pitch of 1.68 mm (M) or 2.6 mm (B). The Power (W) of Fin PTC Air Heaters with fin pitch 2.6 mm (B) is 90% of Fin PTC Air Heaters with fin pitch 1.68 mm (M). Please refer to Notes on Part Numbering for the difference in Power (W) efficiency for each fin pitch type and insulation type.
  • Customized wattage, length and specifications can also be designed for large quantities.