Quiet Operation
Helical gears reduce vibration and noise.
High Torque
High output torque is compared to spur gear planetary gear reducers.
High Efficiency
Efficiency for 1-stage model exceeds 97%; 2-stage model exceeds 94%.
Helical gears reduce vibration and noise.
High Torque
High output torque is compared to spur gear planetary gear reducers.
High Efficiency
Efficiency for 1-stage model exceeds 97%; 2-stage model exceeds 94%.
Unit of Measure
Specifications
Brands |
N/APelonis Technologies |
Model |
N/A220 |
Ratio |
N/A8 |
Output Bearing |
N/AStandard (Keyway) |
Stage |
N/A1-Stage |
Rated Output Torque (Nominal Output Torque) (T2N) |
N/A1605 N·m |
Maximum Acceleration Torque (T2B) |
N/A1.8 Times of Rated Output Torque |
Maximum Output Torque (Emergency Stop Torque) (T2NOT) |
N/A3 Times of Rated Output Torque |
Rated Input Speed (n1N) |
N/A2000 rpm |
Maximum Input Speed (n1B) |
N/A3000 rpm |
Backlash |
N/A≤ 8 arc·min |
Torsional Rigidity |
N/A240 N·m/arc·min |
Maximum Radial Force (F2rB) |
N/A48450 N |
Maximum Axial Force (F2aB) |
N/A24225 N |
S5 Cycle Operation Service Life (LH) |
N/A>30000 hours |
S1 Continuous Operation Service Life (LH) |
N/A>15000 hours |
Efficiency (η) |
N/A≥ 97 % |
Operating Temperature |
N/A-25 to +90 ºC |
Lubrication |
N/ASynthetic Grease |
Protection Class |
N/AIngress Protection (IP65) |
Mounting Position |
N/AAny |
Noise Level |
N/A≤ 70 dB |
Weight |
N/A42.5 kg |
Weight Tolerance (±) |
N/A3 % |
Mass Moments of Inertia |
N/A50.84 kg·cm² |
Dimensions
Dimension A1 |
N/A250毫米 |
Dimension A2 |
N/A17 mm |
Dimension A3 |
N/A75 mm |
Dimension A4 |
N/A180 mm |
Dimension A5 |
N/A12.5 mm14.5 mm |
Dimension A6 |
N/AM16 x P2.0 |
Dimension A7 |
N/A20 mm |
Dimension A8 |
N/A79.5 mm |
Dimension B1 |
N/A220 mm |
Dimension B2 |
N/A139 mm |
Dimension B3 |
N/A30 mm |
Dimension B4 |
N/A90 mm |
Dimension B5 |
N/A104 mm |
Dimension B6 |
N/A20 mm |
Dimension B7 |
N/A367.5 mm369.5 mm |
Dimension C1 |
N/A200 mm265 mm300 mm |
Dimension C2 |
N/AM12M16 |
Dimension C3 |
N/A42 mm48 mm55 mm |
Dimension C4 |
N/A117.5 mm119.5 mm |
Dimension C5 |
N/A114.3 mm230 mm250毫米 |
Dimension C6 |
N/AM10 x P1.5 |
Dimension C7 |
N/A222 mm250毫米265 mm |
Features
Features |
N/AIntegrated Planetary Arm Bracket 行星臂架和输出shaft are one-piece constructed to increase torsional rigidity and accuracy. Full Needle Roller Bearings Design The planetary gear transmission employs full needle roller bearings without a retainer to increase the contact surface. This greatly improves structural rigidity and service life. Collet Locking Mechanism The input-end and the motor are coupled through a collet locking mechanism. The mechanism is dynamically balanced to ensure concentricity and balance on the connection and has no backlash for power transmission while running at a high speed. One-Piece Helical Gear Box The gear box and internal ring are a one-piece construction design. The speed reduction mechanism employs helical gears that provide two times the meshing rate of teeth compared to regular spur gears. It operates very smoothly, has low noise, high output torque, and low backlash |