Quiet Operation
Grinding spiral bevel gear & Helical gears reduce vibration and noise.
High Rigidity & High Torque
High rigidity & high torque are achieved by integrant needle roller bearings and are one-piece constructed.
High Efficiency
Efficiency for 1-stage model exceeds 95%; 2-stage model exceeds 92%.
Grinding spiral bevel gear & Helical gears reduce vibration and noise.
High Rigidity & High Torque
High rigidity & high torque are achieved by integrant needle roller bearings and are one-piece constructed.
High Efficiency
Efficiency for 1-stage model exceeds 95%; 2-stage model exceeds 92%.
Unit of Measure
Specifications
Brands |
N/APelonis Technologies |
Model |
N/A142 |
Ratio |
N/A10 |
Output Bearing |
N/ASolid Output Shaft (No Keyway) |
Stage |
N/A1-Stage |
Rated Output Torque (Nominal Output Torque) (T2N) |
N/A452 N·m |
Maximum Acceleration Torque (T2B) |
N/A1.8 Times of Rated Output Torque |
Maximum Output Torque (Emergency Stop Torque) (T2NOT) |
N/A3 Times of Rated Output Torque |
Rated Input Speed (n1N) |
N/A3000 rpm |
Maximum Input Speed (n1B) |
N/A5000 rpm |
Backlash |
N/A≤ 10 arc·min |
Torsional Rigidity |
N/A60 N·m/arc·min |
Maximum Radial Force (F2rB) |
N/A8830 N |
Maximum Axial Force (F2aB) |
N/A4410 N |
S5 Cycle Operation Service Life (LH) |
N/A>30000 hours |
S1 Continuous Operation Service Life (LH) |
N/A>15000 hours |
Efficiency (η) |
N/A≥95% |
Operating Temperature |
N/A-25 to +90 ºC |
Lubrication |
N/ASynthetic Grease |
Protection Class |
N/AIngress Protection (IP65) |
Mounting Position |
N/AAny |
Noise Level |
N/A≤ 74 dB |
Weight |
N/A23.16 kg |
Weight Tolerance (±) |
N/A3 % |
Mass Moments of Inertia |
N/A23.5 kg·cm² |
Dimensions
Dimension A1 |
N/A165 mm |
Dimension A2 |
N/A11 mm |
Dimension A3 |
N/A40 mm |
Dimension A4 |
N/A130 mm |
Dimension A5 |
N/A10 mm |
Dimension A6 |
N/AM12 x P1.75 |
Dimension A7 |
N/A12 mm |
Dimension A8 |
N/A43 mm |
Dimension B1 |
N/A142 mm |
Dimension B2 |
N/A92 mm |
Dimension B3 |
N/A15 mm |
Dimension B4 |
N/A65 mm |
Dimension B5 |
N/A74 mm |
Dimension B6 |
N/A15 mm |
Dimension B7 |
N/A165.5 mm |
Dimension B8 |
N/A236.5 mm |
Dimension B9 |
N/A328.5 mm |
Dimension C1 |
N/A145 mm165 mm215 mm |
Dimension C2 |
N/AM8M10M12 |
Dimension C3 |
N/A32 mm35 mm38 mm |
Dimension C4 |
N/A85 mm |
Dimension C5 |
N/A110 mm130 mm180 mm |
Dimension C6 |
N/AM10 x P1.5 |
Dimension C7 |
N/A146 mm150 mm190 mm |
Dimension C8 |
N/A165.7 mm |
Dimension C9 |
N/A236.7 mm |
Features
Features |
N/ASpiral Bevel Gear 研磨的螺旋斜角齿轮具有紧凑的结构,在传输效率,稳定性和耐用性方面非常出色。它具有较大的弧度重叠因子,具有耐磨性,并且使用寿命长。 Integratory Planetary ARM Bracket 行星臂架和输出shaft are one-piece constructed to increase torsional rigidity and accuracy. Full Needle Roller Bearings Design The planetary gear transmission employs full needle roller bearings without a retainer to increase the contact surface. This greatly improves structural rigidity and service life. 夹头锁定机制 The input-end and the motor are coupled through a collet locking mechanism. The mechanism is dynamically balanced to ensure concentricity and balance on the connection and has no backlash for power transmission while running at a high speed. One-Piece Helical Gear Box The gear box and internal ring are a one-piece construction design. The speed reduction mechanism employs helical gears that provide two times the meshing rate of teeth compared to regular spur gears. It operates very smoothly, has low noise, high output torque, and low backlash. |