Request Information
Quiet Operation
Grinding spiral bevel gear & Helical gears reduce vibration and noise.

High Rigidity & High Torque
High rigidity & high torque are achieved by integrant needle roller bearings and are one-piece constructed.

High Efficiency
Efficiency for 1-stage model exceeds 95%; 2-stage model exceeds 92%.
Unit of Measure

Specifications

Brands

 N/APelonis Technologies

Model

 N/A180

Ratio

 N/A6

Output Bearing

 N/AStandard (Keyway)

Stage

 N/A1-Stage

Rated Output Torque (Nominal Output Torque) (T2N)

 N/A985 N·m

Maximum Acceleration Torque (T2B)

 N/A1.8 Times of Rated Output Torque

Maximum Output Torque (Emergency Stop Torque) (T2NOT)

 N/A3 Times of Rated Output Torque

Rated Input Speed (n1N)

 N/A3000 rpm

Maximum Input Speed (n1B)

 N/A4000 rpm

Backlash

 N/A≤ 10 arc·min

Torsional Rigidity

 N/A140 N·m/arc·min

Maximum Radial Force (F2rB)

 N/A14820 N

Maximum Axial Force (F2aB)

 N/A7410 N

S5 Cycle Operation Service Life (LH)

 N/A>30000 hours

S1 Continuous Operation Service Life (LH)

 N/A>15000 hours

Efficiency (η)

 N/A≥95%

Operating Temperature

 N/A-25 to +90 ºC

Lubrication

 N/ASynthetic Grease

Protection Class

 N/AIngress Protection (IP65)

Mounting Position

 N/AAny

Noise Level

 N/A≤ 76 dB

Weight

 N/A51 kg

Weight Tolerance (±)

 N/A3 %

Mass Moments of Inertia

 N/A68.2 kg·cm²

Dimensions

Dimension A1

 N/A215 mm

Dimension A2

 N/A13 mm

Dimension A3

 N/A55 mm

Dimension A4

 N/A160 mm

Dimension A5

 N/A12.5 mm14.5 mm

Dimension A6

 N/AM14 x P2.0

Dimension A7

 N/A16 mm

Dimension A8

 N/A59 mm

Dimension B1

 N/A180 mm

Dimension B2

 N/A106 mm

Dimension B3

 N/A20 mm

Dimension B4

 N/A70 mm

Dimension B5

 N/A82 mm

Dimension B6

 N/A16 mm

Dimension B7

 N/A223.6 mm

Dimension B8

 N/A313.6 mm

Dimension B9

 N/A419.6 mm

Dimension C1

 N/A200 mm215 mm265 mm

Dimension C2

 N/AM10M12M16

Dimension C3

 N/A38 mm42 mm48 mm55 mm

Dimension C4

 N/A117 mm119 mm

Dimension C5

 N/A114.3 mm180 mm230 mm

Dimension C6

 N/AM10 x P1.5

Dimension C7

 N/A182 mm200 mm250毫米

Dimension C8

 N/A235 mm237 mm

Dimension C9

 N/A325 mm327 mm

Features

Features

 N/ASpiral Bevel Gear
The grinding spiral bevel gear has a compact structure and is excellent in transmission efficiency, stability, and durability. It has a large arc overlapping factor, is wear resistant, and has a long service life.

Integratory Planetary ARM Bracket
行星臂架和output shaft are one-piece constructed to increase torsional rigidity and accuracy.

Full Needle Roller Bearings Design
The planetary gear transmission employs full needle roller bearings without a retainer to increase the contact surface. This greatly improves structural rigidity and service life.

夹头锁定机制
The input-end and the motor are coupled through a collet locking mechanism. The mechanism is dynamically balanced to ensure concentricity and balance on the connection and has no backlash for power transmission while running at a high speed.

One-Piece Helical Gear Box
The gear box and internal ring are a one-piece construction design. The speed reduction mechanism employs helical gears that provide two times the meshing rate of teeth compared to regular spur gears. It operates very smoothly, has low noise, high output torque, and low backlash.