Request Information
Quiet Operation
Grinding spiral bevel gear and Helical gears reduce vibration and noise.

High Rigidity and High Torque
High rigidity and high torque are achieved by integrant needle roller bearings and are one-piece constructed.

High Efficiency
Efficiency for 1-stage model exceeds 95%; 2-stage model exceeds 92%.
Unit of Measure

Specifications

Brands

 N/APelonis Technologies

Model

 N/A62

Ratio

 N/A3

Output Bearing

 N/AStandard (Keyway)

Stage

 N/A1-Stage

Rated Output Torque (Nominal Output Torque) (T2N)

 N/A54 N·m

Maximum Acceleration Torque (T2B)

 N/A1.8 Times of Rated Output Torque

Maximum Output Torque (Emergency Stop Torque) (T2NOT)

 N/A3 Times of Rated Output Torque

Rated Input Speed (n1N)

 N/A3000 rpm

Maximum Input Speed (n1B)

 N/A6000 rpm

Backlash

 N/A≤ 10 arc·min

Torsional Rigidity

 N/A6 N·m/arc·min

Maximum Radial Force (F2rB)

 N/A1120 N

Maximum Axial Force (F2aB)

 N/A560 N

S5 Cycle Operation Service Life (LH)

 N/A>30000 hours

S1 Continuous Operation Service Life (LH)

 N/A>15000 hours

Efficiency (η)

 N/A≥95%

Operating Temperature

 N/A-25 to +90 ºC

Lubrication

 N/ASynthetic Grease

Protection Class

 N/AIngress Protection (IP65)

Mounting Position

 N/AAny

Noise Level

 N/A≤ 68 dB

Weight

 N/A2 kg

Weight Tolerance (±)

 N/A3 %

Mass Moments of Inertia

 N/A0.36 kg·cm²

Flange Model

 N/A62

Bevel Gear Reducer Model

 N/AST65

Dimensions

Dimension A1

 N/A70 mm

Dimension A2

 N/A5.5 mm

Dimension A3

 N/A16 mm

Dimension A4

 N/A50 mm

Dimension A5

 N/A7 mm

Dimension A6

 N/AM5 x P0.8

Dimension A7

 N/A5 mm

Dimension A8

 N/A18 mm

Dimension B1

 N/A62 mm

Dimension B2

 N/A36 mm

Dimension B3

 N/A7 mm

Dimension B4

 N/A20 mm

Dimension B5

 N/A28 mm

Dimension B6

 N/A8 mm

Dimension B7

 N/A87.5 mm

Dimension B8

 N/A128 mm

Dimension B9

 N/A164 mm

Dimension C1

 N/A70 mm75 mm90 mm

Dimension C2

 N/AM4M5M6

Dimension C3

 N/A14 mm

Dimension C4

 N/A36 mm

Dimension C5

 N/A50 mm60 mm70 mm

Dimension C6

 N/AM5 x P0.8

Dimension C7

 N/A64 mm70 mm80 mm

Dimension C8

 N/A77 mm

Dimension C9

 N/A110 mm

Dimension D1

 N/A62 mm

Dimension D2

 N/A52 mm

Dimension D3

 N/A26 mm

Dimension D4

 N/AM5 x P0.8

Features

Features

 N/ASpiral Bevel Gear
磨削弧齿锥齿轮的紧凑structure and is excellent in transmission efficiency, stability, and durability. It has a large arc overlapping factor, is wear resistant, and has a long service life.

Integrated Planetary Arm Bracket
行星臂架和输出shaft are one-piece constructed to increase torsional rigidity and accuracy.

Full Needle Roller Bearings Design
The planetary gear transmission employs full needle roller bearings without a retainer to increase the contact surface. This greatly improves structural rigidity and service life.

Collet Locking Mechanism
The input-end and the motor are coupled through a collet locking mechanism. The mechanism is dynamically balanced to ensure concentricity and balance on the connection and has no backlash for power transmission while running at a high speed.

One-piece Helical Gear Box
The gear box and internal ring are a one-piece construction design. The speed reduction mechanism employs helical gears that provide two times the meshing rate of teeth compared to regular spur gears. It operates very smoothly, has low noise, high output torque, and low backlash.