Quiet Operation
Grinding spiral bevel gear & Helical gears reduce vibration and noise.
高刚度和高扭矩
High rigidity & high torque are achieved by integrant needle roller bearings and a one-piece construction.
High Efficiency
Efficiency for 1-stage model exceeds 95%; 2-stage model exceeds 92%.
Grinding spiral bevel gear & Helical gears reduce vibration and noise.
高刚度和高扭矩
High rigidity & high torque are achieved by integrant needle roller bearings and a one-piece construction.
High Efficiency
Efficiency for 1-stage model exceeds 95%; 2-stage model exceeds 92%.
测量单位
规格
Brands |
N/A金宝搏官网mgPelonis技术 |
Model |
N/A120 |
Ratio |
N/A10 |
输出轴承 |
N/AStandard (Keyway) |
反弹Class |
N/AP0 |
阶段 |
N/A1-Stage |
额定输出扭矩(标称输出扭矩)(t2 n) |
N/A294 N·m |
最大加速扭矩(t2b) |
N/A1.8次额定输出扭矩 |
最大输出扭矩(紧急停止扭矩)(T2not) |
N/A3 Times of Rated Output Torque |
额定输入速度(n1n) |
N/A3000 rpm |
Maximum Input Speed (n1B) |
N/A5000 rpm |
反弹 |
N/A≤ 3 arc·min |
扭转刚度 |
N/A27 n·m/arc·最小 |
Maximum Radial Force (F2RB) |
N/A8760 n |
Maximum Axial Force (F2aB) |
N/A7500 N |
S5周期操作使用寿命(LH) |
N/A>30000 hours |
S1 Continuous Operation Service Life (LH) |
N/A>15000 hours |
效率(η) |
N/A≥ 97 % |
工作温度 |
N/A-25至+90ºC |
Lubrication |
N/ASynthetic Grease |
Protection Class |
N/A入口保护(IP65) |
安装位置 |
N/A任何 |
Noise Level |
N/A≤63dB |
重量 |
N/A6.7公斤 |
重量公差(±) |
N/A2% |
大量惯性时刻 |
N/A2.51 kg·cm² |
方面
Dimension A1 |
N/A108 mm |
Dimension A2 |
N/AM8x 1.25 |
Dimension A3 |
N/A32毫米 |
Dimension A4 |
N/A90毫米 |
Dimension A5 |
N/A10毫米20毫米 |
Dimension A6 |
N/AM12 x 1.75 |
Dimension A7 |
N/A10毫米 |
Dimension A8 |
N/A35 mm |
Dimension B1 |
N/A122 mm |
Dimension B2 |
N/A70 mm |
Dimension B3 |
N/A9 mm |
Dimension B4 |
N/A3毫米 |
Dimension B5 |
N/A50毫米 |
Dimension B6 |
N/A58 mm |
Dimension B7 |
N/A211 mm221毫米 |
Dimension C1 |
N/A115毫米145毫米165 mm |
Dimension C2 |
N/AM6M8M10 |
Dimension C3 |
N/A24 mm28 mm32毫米 |
Dimension C4 |
N/A67毫米77毫米 |
Dimension C5 |
N/A95毫米110 mm130毫米 |
Dimension C6 |
N/AM8x 1.25 |
Dimension C7 |
N/A122 mm130毫米150毫米 |
Features
Features |
N/A螺旋齿轮设计 The speed reduction mechanism employs helical gears and provides two times the meshing rate of teeth compared to regular spur gears. It also features extremely smooth operation, low noise, high torque output, and low backlash. 高精度装置加工 由高质量的NI-CR-MO合金钢(SNCM220)制造,精密加工和碳化至硬度为57-60 HRC。精密牙齿磨削可确保齿轮精度达到DIN6类。 综合行星臂支架 行星臂支架和输出轴是单件式构造的,以提高扭转刚度和准确性。 全针辊轴承设计 The planetary gear transmission employs full needle roller bearings without a retainer to increase the contact surface. This greatly improves structural rigidity and service life. Collet Locking Mechanism 输入末端和电动机通过夹头锁定机构耦合。该机制是动态平衡的,以确保连接上的同心和平衡,并且在高速运行时没有强烈反弹。 一件式装饰箱和高级表面处理 变速箱和内环是单件式构造的,以实现高刚度和高扭矩。 |