Low Backlash
Backlash for 1-stage model is under 7 arc·min. Also available specification with 1 arc·min of backlash. Backlash for 2-stage model is under 9 arc·min.
High Efficiency
Efficiency for 1-stage model exceeds 97%; 2-stage model exceeds 94%.
High Input Speed
Input speed allows for 5,000 RPM.
Backlash for 1-stage model is under 7 arc·min. Also available specification with 1 arc·min of backlash. Backlash for 2-stage model is under 9 arc·min.
High Efficiency
Efficiency for 1-stage model exceeds 97%; 2-stage model exceeds 94%.
High Input Speed
Input speed allows for 5,000 RPM.
Unit of Measure
Specifications
Brands |
N/APelonis Technologies |
Model |
N/A44 |
Ratio |
N/A5 |
Output Bearing |
N/ASolid Output Shaft (No Keyway) |
Backlash Class |
N/AP2 |
Stage |
N/A1-Stage |
Rated Output Torque (Nominal Output Torque) (T2N) |
N/A16 N·m |
Maximum Acceleration Torque (T2B) |
N/A1.8 Times of Rated Output Torque |
Maximum Output Torque (Emergency Stop Torque) (T2NOT) |
N/A3 Times of Rated Output Torque |
Rated Input Speed (n1N) |
N/A3000 rpm |
Maximum Input Speed (n1B) |
N/A6000 rpm |
Backlash |
N/A≤ 7 arc·min |
Torsional Rigidity |
N/A3 N·m/arc·min |
Maximum Radial Force (F2rB) |
N/A380 N |
Maximum Axial Force (F2aB) |
N/A190 N |
S5 Cycle Operation Service Life (LH) |
N/A>30000 hours |
S1 Continuous Operation Service Life (LH) |
N/A>15000 hours |
Efficiency (η) |
N/A≥ 97 % |
Operating Temperature |
N/A-25 to +90 ºC |
Lubrication |
N/ASynthetic Grease |
Protection Class |
N/AIngress Protection (IP65) |
Mounting Position |
N/AAny |
Noise Level |
N/A≤ 56 dB |
Weight |
N/A0.6 kg |
Weight Tolerance (±) |
N/A3 % |
Mass Moments of Inertia |
N/A0.03 kg·cm² |
Dimensions
Dimension A1 |
N/A50 mm |
Dimension A2 |
N/A4.5 mm |
Dimension A3 |
N/A13 mm |
Dimension A4 |
N/A35 mm |
Dimension A5 |
N/A5 mm |
Dimension A6 |
N/AM4 x P0.7 |
Dimension A7 |
N/A58 mm |
Dimension A8 |
N/A5 mm |
Dimension A9 |
N/A15 mm |
Dimension B1 |
N/A44 mm |
Dimension B2 |
N/A26 mm |
Dimension B3 |
N/A5 mm |
Dimension B4 |
N/A1 mm |
Dimension B5 |
N/A15 mm |
Dimension B6 |
N/A20 mm |
Dimension B7 |
N/A5 mm |
Dimension B8 |
N/A95 mm |
Dimension C1 |
N/A46 mm60 mm63 mm |
Dimension C2 |
N/AM3M4M5 |
Dimension C3 |
N/A8 mm9 mm11 mm |
Dimension C4 |
N/A26 mm30.5 mm |
Dimension C5 |
N/A30 mm40 mm50 mm |
Dimension C6 |
N/AM4 x P0.7 |
Dimension C7 |
N/A46 mm55 mm |
Features
Features |
N/AHigh Torque Higher output torque is compared to spur gear planetary gear reducers. High Stability Employs high tensile strength alloy steel. Gear hardening is made for the entire gear which extends gear service life and maintains high accuracy after a long period of operation. High Speed Reduction Ratio The gear reducer is a modular design. The planetary gear box can be connected. The speed reduction ratio can reach over 1/10000. |
