安静的操作
Helical gears reduce vibration and noise.
High Precision
反弹≤ 3 arc·min reaches precision alignment.
High Rigidity and Torque
High rigidity and high torque are achieved by integrant needle roller bearings and a one-piece construction.
Helical gears reduce vibration and noise.
High Precision
反弹≤ 3 arc·min reaches precision alignment.
High Rigidity and Torque
High rigidity and high torque are achieved by integrant needle roller bearings and a one-piece construction.
Unit of Measure
Specifications
品牌 |
N/A。Pelonis Technologies |
模型 |
N/A。110 |
比率 |
N/A。35 |
Output Bearing |
N/A。标准(键道) |
反弹课 |
N/A。P2 |
阶段 |
N/A。2阶段 |
Rated Output Torque (Nominal Output Torque) (T2n) |
N/A。309 N·m |
Maximum Acceleration Torque (T2b) |
N/A。1.8 Times of Rated Output Torque |
Maximum Output Torque (Emergency Stop Torque) (T2nOT) |
N/A。额定输出扭矩的3次 |
Rated Input Speed (n1n) |
N/A。3000 rpm |
最大输入速度(n1B) |
N/A。6000 rpm |
反弹 |
N/A。≤9弧形·最小 |
Torsional Rigidity |
N/A。86 N·M/弧形·最小 |
Maximum Radial Force (Ball Bearing) (n2rB) |
N/A。12720 n |
最大轴向力(球轴承)(n2ab) |
N/A。6360 n |
最大径向力(锥度轴承)(F2rB) |
N/A。23000 n |
Maximum Axial Force (Taper Bearing) (F2ab) |
N/A。11500 n |
S5周期操作使用寿命(LH) |
N/A。> 30000小时 |
S1连续运营使用寿命(lH) |
N/A。> 15000小时 |
Efficiency (η) |
N/A。≥94% |
Operating Temperature |
N/A。-25至+221ºC |
润滑 |
N/A。合成油脂 |
保护课 |
N/A。Ingress Protection (IP65) |
Mounting Position |
N/A。Any |
噪音水平 |
N/A。≤ 63 dB |
Weight |
N/A。8.5公斤 |
Weight Tolerance (±) |
N/A。3% |
Mass Moments of Inertia |
N/A。4.41公斤·Cm² |
Dimensions
尺寸A1 |
N/A。135 mm |
孔数(A2) |
N/A。8 |
尺寸A2 |
N/A。5.5毫米 |
尺寸A3 |
N/A。80 mm |
尺寸A4 |
N/A。110毫米 |
尺寸A5 |
N/A。9毫米 |
尺寸A6 |
N/A。40毫米 |
尺寸A7 |
N/A。146 mm |
尺寸A8 |
N/A。63毫米 |
孔数(A9) |
N/A。11 |
尺寸A9 |
N/A。M6 x P1.0 |
尺寸A10 |
N/A。6 mm |
维度B1 |
N/A。125 mm |
维度B2 |
N/A。29 mm |
维度B3 |
N/A。12 mm |
维度B4 |
N/A。6 mm |
维度B5 |
N/A。10mm |
维度B6 |
N/A。12 mm |
维度B7 |
N/A。8毫米 |
维度B8 |
N/A。7毫米 |
维度B9 |
N/A。168 mm |
维度C1 |
N/A。90 mm110毫米115 mm145 mm |
尺寸C2 |
N/A。M5M6M8 |
维度C3 |
N/A。24毫米 |
维度C4 |
N/A。59毫米 |
维度C5 |
N/A。70毫米80 mm95毫米110毫米 |
维度C6 |
N/A。M6 x P1.0 |
维度C7 |
N/A。92毫米110毫米130毫米 |
维度C8 |
N/A。126.5 mm |
维度C9 |
N/A。199.5毫米 |
维度C10 |
N/A。1/8英寸 |
维度C10线程类型 |
N/A。管线(PT) |
尺寸D1 |
N/A。14毫米 |
尺寸D2 |
N/A。14毫米 |
尺寸D3 |
N/A。90 mm |
Output Frame Dimensions
Output Frame Dimension A1 |
N/A。40毫米 |
Output Frame Dimension A2 |
N/A。63毫米 |
Output Frame Dimension A3 |
N/A。80 mm |
Output Frame Dimension A4 |
N/A。110毫米 |
Output Frame Dimension A5 |
N/A。135 mm |
Output Frame Dimension B6 |
N/A。M6 x P1 |
Output Frame Dimension B8 |
N/A。6 mm |
Output Frame Dimension B9 |
N/A。5.5毫米 |
特征
特征 |
N/A。One-Piece Gearbox Housing 变速箱和内环齿轮是一件式结构。高齿轮精度符合DIN6课程。 满滚针轴承的设计 The planetary gear transmission employs full needle roller bearings without a retainer to increase the contact surface that maximizes structural rigidity and service life. 夹头锁定机制 The input-end and the motor are coupled through a collet locking mechanism that ensures concentricity and balance on the connection and no backlash for power transmission while running at high speed. Integrated Planetary Arm Bracket The planetary arm bracket and the output shaft are one-piece constructed to increase torsional rigidity and accuracy. The entire structure is machined for controlling accuracy in the specified tolerance. |