Low Backlash
Backlash for 1-stage model is under 7 arc·min. Also available specification with 1 arc·min of backlash. Backlash for 2-stage model is under 9 arc·min.
High Efficiency
Efficiency for 1-stage model exceeds 97%; 2-stage model exceeds 94%.
High Input Speed
Input speed allows for 5,000 RPM.
Backlash for 1-stage model is under 7 arc·min. Also available specification with 1 arc·min of backlash. Backlash for 2-stage model is under 9 arc·min.
High Efficiency
Efficiency for 1-stage model exceeds 97%; 2-stage model exceeds 94%.
High Input Speed
Input speed allows for 5,000 RPM.
Unit of Measure
Specifications
Brands |
N/APelonis Technologies |
Model |
N/A90 |
Ratio |
N/A7 |
Output Bearing |
N/AStandard (Keyway) |
Backlash Class |
N/APs |
Stage |
N/A1-Stage |
Rated Output Torque (Nominal Output Torque) (T2N) |
N/A149 N·m |
Maximum Acceleration Torque (T2B) |
N/A1.8 Times of Rated Output Torque |
Maximum Output Torque (Emergency Stop Torque) (T2NOT) |
N/A3 Times of Rated Output Torque |
Rated Input Speed (n1N) |
N/A3000 rpm |
Maximum Input Speed (n1B) |
N/A6000 rpm |
Backlash |
N/A≤ 1 arc·min |
Torsional Rigidity |
N/A14 N·m/arc·min |
最大径向力(F2rB) |
N/A3200 N |
Maximum Axial Force (F2aB) |
N/A1600 N |
S5 Cycle Operation Service Life (LH) |
N/A>30000 hours |
S1 Continuous Operation Service Life (LH) |
N/A>15000 hours |
Efficiency (η) |
N/A≥ 97 % |
Operating Temperature |
N/A-25 to +90 ºC |
润滑 |
N/ASynthetic Grease |
Protection Class |
N/AIngress Protection (IP65) |
Mounting Position |
N/AAny |
Noise Level |
N/A≤ 60 dB |
Weight |
N/A3.4公斤 |
Weight Tolerance (±) |
N/A3 % |
Mass Moments of Inertia |
N/A0.45 kg·cm² |
Dimensions
Dimension A1 |
N/A82 mm |
Dimension A2 |
N/AM6 x P1.0 |
Dimension A3 |
N/A22 mm |
Dimension A4 |
N/A70 mm |
Dimension A5 |
N/A9 mm23.5 mm |
Dimension A6 |
N/AM8 x P1.25 |
Dimension A7 |
N/A102 mm |
Dimension A8 |
N/A6 mm |
Dimension A9 |
N/A24.5 mm |
Dimension B1 |
N/A90 mm |
Dimension B2 |
N/A46 mm |
Dimension B3 |
N/A8 mm |
Dimension B4 |
N/A2 mm |
Dimension B5 |
N/A30 mm |
Dimension B6 |
N/A36 mm |
Dimension B7 |
N/A164.5 mm179 mm |
Dimension C1 |
N/A90 mm100 mm115 mm145 mm |
Dimension C2 |
N/AM5M6M8 |
Dimension C3 |
N/A19 mm22 mm24 mm |
Dimension C4 |
N/A59 mm73.5 mm |
Dimension C5 |
N/A70 mm80 mm95 mm110 mm |
Dimension C6 |
N/AM6 x P1.0 |
Dimension C7 |
N/A92 mm110 mm130 mm |
Features
Features |
N/AHigh Torque Higher output torque is compared to spur gear planetary gear reducers. High Stability Employs high tensile strength alloy steel. Gear hardening is made for the entire gear which extends gear service life and maintains high accuracy after a long period of operation. High Speed Reduction Ratio The gear reducer is a modular design. The planetary gear box can be connected. The speed reduction ratio can reach over 1/10000. |
