Pelonis Technologies
Pelonis Technologies
444 Creamery Way #500
Exton, PA 19341
Toll Free:888-546-0524
全世界：1.610.594.6000
Email: sales@pelonistech.com
Print Back
This newly designed TH type Fin PTC Air Heater comes with two tube pitches. The standard pitch is 31 mm. For special designs, tube pitch of 25 mm is also available.

PTC has a unique heat property that allows the PTC heat output to be regulated by the airflow applied. The higher the airflow, the higher the heat output and power (wattage). Therefore, depending on the end design, if the ambient temperature is high, the PTC output power will decrease; if the airflow is high with low ambient temperature, then the PTC output power will increase.
Unit of Measure

Specifications

品牌

 N/APelonis Technologies

Type

 N/AWired

Length (L)

 N/A128 mm

Length (L1)

 N/A143 mm

Rated Voltage

 N/A220 v

Maximum Voltage

 N/A260 V

Maximum Inrush Current

 N/A6 a

Air Speed

 N/A6.4 m/s

Power at 6.4 Meter Per Second (m/s) Air Speed and 20 Degree (º) Celsius Temperature

 N/A600 Watts

Tolerance for Power at 6.4 Meter Per Second (m/s) Air Speed and 20 Degree (º) Celsius Temperature (±)

 N/A10 %

Power at 6.4 Meter Per Second (m/s) Air Speed and 0 Degree (º) Celsius Temperature

 N/A650瓦

Tolerance for Power at 6.4 Meter Per Second (m/s) Air Speed and 0 Degree (º) Celsius Temperature (±)

 N/A9％

Available Frames

 N/AMHF-90

Intended Application

 N/AAir

管数

 N/A2

Fin Width

 N/A45 mm

General Specifications

Industry Standards/Certifications

 N/ACE Recognized Reach CompliantCRU®US RecognizedCSARestriction of Hazardous Substances (RoHS) Compliant承销商实验室（UL）

Fin Pitch

 N/A2.0 mm

电压

 N/ABoth AC/DC available. Please refer to Part Numbering for voltage ranges (for automotive use 12V˜520V).

Power

 N/A50˜2000 Watts

Exemptions

 N/AOur PTC elements contain Pb under RoHS exemption 7(c)-I : Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound.

Dimensions

Width

 N/A45 mm

Thickness

 N/A26 mm

Special Length (L)

 N/A225 mm268 mm314 mm358毫米403 mm446毫米492 mm

Design Consideration

Power In

 N/ASingle sided Positive (+) and negative (-) inputs

Wiring

 N/A可以直接连接到电力
需要定制

Standard Frames

 N/AAvailable

Limitations

 N/A≤15 A≤1800 Watts

Suitable Applications

 N/A
  • Most suitable for applications where power connection is fixed on a single side.
  • 汽车的更好振动耐力。防止连接松动或终端之间的接触不良。降低了男性和女性末端之间连接点的氧化可能性，从而导致电阻增加，导致关节过热和振动失败。
  • 可以为位于高湿度环境中的应用添加其他硅密封件。有效地增加了PTC的寿命。

Heater Type

 N/APositive Temperature Coefficient (PTC)

电压Selection

 N/A
  • Standard voltages: 100V~120V and 200V~240V
  • For all other voltage range requirements, please contact us for additional information.

应用Note for Voltage Selection

 N/A
  • 根据恒定气流,增加电压将have little effect on the heater power.

Positive Temperature Coefficient (PTC) Power (W) and Air Flow/Air Speed Considerations

 N/A
  • High air speed is correlated with high heat dissipation rate which results in higher power and a more rapid increase of the surrounding temperature.
  • 在低空速度下，加热器功率将降低，但是空气插座的温度将很高。
  • Under no airflow, the surface of the PTC fins will approach Curie temperature. The heater power may drop to 1/20 of normal power (at air speed of 6.4 m/s) and stabilizes at a constant temperature.

应用Note for Positive Temperature Coefficient (PTC) Power (W) and Air Flow/Air Speed Considerations

 N/A
  • PTC加热器的功率与加热器的环境热条件和散热速率有关。当环境温度明显高于参考温度或限制传热时，PTC的阻力将迅速上升，功耗会降低。因此，散热越高，输出功率越高。
  • The surface temperature of PTC is self regulated. The lower the surface temperature, the lower the power.
  • The MH and MSH type Fin PTC Air Heaters allow three stage temperature settings (high, medium, low). The PTC heater tubes can be controlled independently (please see the "Installation" section for circuit connection), effectively reducing electricity cost and increasing product life. If this function is used in conjunction with air speed adjustment (fans), it will allow more flexibility in the adjustment of air flow and temperature.

Positive Temperature Coefficient (PTC) Fin Pitch Selection

 N/A
  • Unique Fin PTC pitch range provides a diverse choice of high efficiency vs low air resistance (lower noise level). Choices from 1.2 mm to 2.6 mm are available for various application selections.
    • 超高加热效率鳍螺距：1.2毫米（S），1.68毫米（m）较大的散热面积；更高的输出功率；空气插座的温度较高。
    • Ultra-low-air resistance (lower noise level) Fin Pitch: 2.0 mm (N), 2.6 mm (B) Less heat dissipation area; projects heat further; lower output power.
  • 规格表中的功率（W）基于具有超高效率鳍的鳍PTC空气加热器。MSH，SH和OH型号的鳍螺距1.68毫米（M），MH型号为1.2 mm（S）。
  • The Power (W) of Fin PTC Air Heater with fin pitch 2.0 mm (N) is 95% of Fin PTC Air Heater with fin pitch 1.2 mm (S).
  • Fin Pitch 2.6 mm（B）的Fin PTC空气加热器的功率（W）为鳍PTC空气加热器的90％，鳍螺距1.2毫米（S）。
  • The Power (W) of PFin PTC Air Heater with fin pitch 2.6 mm (B) is 90% of Fin PTC Air Heater with fin pitch 1.68 mm (M).

Positive Temperature Coefficient (PTC) Insulation Consideration (Doubled Insulation - Electrically Insulated Heater)

 N/A
  • The Power (W) in the "Standard" tables is based on Fin PTC Air Heaters with Single Insulation (S).
  • 具有双绝缘材料（D）的FIN PTC空气加热器的功率（W）比带有单个绝缘的FIN PTC空气加热器低约10％。
  • The price of Fin PTC Air Heaters with double insulation (D) is 15~30% more than single insulation (S) Fin PTC Air Heaters.
  • Double insulated Fin PTC Air Heaters are designed for use where heater exterior (fins) needs to be electrically insulated.
  • Both single insulated and glued typed Fin PTC Air Heaters are not electrically insulated on the heater exterior/fins, hence carrying input voltage.
  • The Fin PTC heating elements of double insulated Fin PTC Air Heaters are completely insulated within the aluminum tubes, allowing complete electric insulation on the heater exterior (fins).

应用Note for Positive Temperature Coefficient (PTC) Insulation Consideration (Doubled Insulation - Electrically Insulated Heater)

 N/A
  • The fins on Fin PTC Air Heaters with Double Insulation (D) are electrically insulated. This is suitable for applications where the device may be in contact with other conductive materials (eg. metal); expose to high humidity; with shock resistance requirement; or in products that require superior stability and quality (eg. automobiles).
  • Due to its high safety and reliability performance, double insulated Fin PTC Air Heaters are mainly used by automobiles, electric vehicles, in large-power house heaters such as cold/warm air-conditioners, fan heaters, disinfecting cabinets, dryers and many more.

概述

概述

 N/APelonis Technologies' innovative Fin PTC Air Heaters are significantly more efficient than coil or conventional heaters and create a very effective heat transfer in a small space.

Positive Temperature Coefficient (PTC) Characteristics

Positive Temperature Coefficient (PTC) Characteristics

 N/AFin PTC Air Heaters have self-regulating characteristics and will not overheat. This results in better conductivity, greater operating efficiency, a stable electronic response, and longer life expectancy.

Innovative Features

Innovative Features

 N/A
  • Available designs include very low air resistance and high heating efficiency.
  • Internal safety-fuse protection; auto-cut-off to prevent abnormal high current or other external factors causing safety concerns.
  • Fast thermal response time and low inrush current; will not cause sparks or flame by instant/sudden power supply variations or when in contact with flammable objects including matches, cotton, paper, etc.
  • Designed with single or double insulation; when in contact with metallic objects, will not cause electric shock or short circuit.
  • 双绝缘PTC可以在水下使用，而不会导致电力泄漏或短路（自定义）。
  • Allows for independent control of single PTC (500W, 800W), double PTC (1000W, 1500W) or triple PTC (1500W, 2000W) heating tubes; reduces electricity cost and extends product life.
  • The poles and terminals are connected by point welding, thereby preventing the electrodes from loosening and causing resistance and temperature to increase due to cold contraction or heat inflation.
  • The heating components are tightly sealed and the electrodes are unexposed which makes Fin PTC Air Heaters suitable for applications in bathrooms or high humidity environments.
  • 长期使用寿命；即使在没有气流条件下加热时，也不要破裂，破裂或燃烧。
  • 没有运动部件要磨损。
  • 电压change does not affect its current and output power (insensitive to unstable voltage).
  • The surface temperature of the PTC pellets does not change while power regulates with ambient temperature and heat dissipation rate. Therefore, the higher the environmental temperature, the greater the power efficiency.
  • Heating power (W) and self-regulating function is in correlation to the heat dissipation rate.

Added Protection

Added Protection

 N/AThe internal heating elements are fully cladded in a sturdy aluminum structure in order to reduce exposure to air and to withstand high levels of humidity and vibration. This method of protection also prevents loosening of the individual heating pellets and eliminates oxidation which can lead to eventual power reduction and shorter life expectancy.

Customized Solutions

Customized Solutions

 N/AFin PTC Air Heaters can be supplied in various sizes based on customer requirements and can also be configured with outer frames, thermostats, fuses, axial cooling fans, and protective shields to provide a complete single source assembly solution.

附加信息

附加信息

 N/AStandard Fin PTC Air Heaters are designed with single stage heating (full power). However, TH type Fin PTC Air Heaters can be designed with multiple power stages by heating one or two tubes at a time. This makes them more economical through power saving and will also help extend heater life expectancy. If multiple stage heating is required in an application design, please contact our Sales Representatives in advance for special design and wiring.

申请

申请

 N/AFIN PTC空气加热器可用于汽车（电动汽车）和其他应用，用于加热，除湿和耐热率，或者在一般的电子设备中，包括手工烘干机，空调，熨斗，层压机和胶粘剂密封机。其他应用程序包括冻结对室外监视摄像机，3C产品和其他电子设备的保护。

Note

Note

 N/A
  • The Power (W) in the Specifications table is based on Fin PTC Air Heaters with Single Insulation (S) and fin pitch of 2.0 mm (N). Please refer to Notes on Part Numbering for the difference in Power (W) efficiency for different insulation type.
  • Customized wattage, length and specifications can also be designed for large quantities.
    Baidu