Print Back
PTC具有独特的热特性,可以通过施加的气流调节PTC热量输出。气流越高,热量输出和功率(瓦数)越高。因此,根据最终设计的不同,如果环境温度较高,则PTC输出功率将降低;如果气流较高,环境温度较低,则PTC输出功率将增加。
测量单位

Specifications

Brands

N/A。金宝搏官网mgPelonis技术

Type

N/A。有线

Length (L)

N/A。93 mm

长度(L1)

N/A。106 mm

Rated Voltage

N/A。220 V

Maximum Voltage

N/A。260 V

Maximum Inrush Current

N/A。2.5 a

Air Speed

N/A。6.4 m/s

Power at 6.4 Meter Per Second (m/s) Air Speed and 20 Degree (º) Celsius Temperature

N/A。250瓦

Tolerance for Power at 6.4 Meter Per Second (m/s) Air Speed and 20 Degree (º) Celsius Temperature (±)

N/A。10 %

电源为6.4米/秒(m/s)空气速度和0度(º)摄氏度

N/A。270瓦

耐力以每秒6.4米(m/s)的空气速度和0度(º)摄氏度(±)的耐受性(±)

N/A。10 %

Available Frames

N/A。MHF-90

Intended Application

N/A。Air

管数

N/A。3

鳍宽度

N/A。65毫米

General Specifications

行业标准/认证

N/A。CE Recognized Reach CompliantCRU®US RecognizedCSARestriction of Hazardous Substances (RoHS) CompliantUnderwriters Laboratories (UL)

鳍螺距

N/A。2.6 mm

Voltage

N/A。两个都AC/DC available. Please refer to Part Numbering for voltage ranges (for automotive use 12V˜520V).

Power

N/A。50〜2000瓦

豁免

N/A。我们的PTC元素在ROHS豁免下包含PB 7(c)-I:除电容器中的电介电陶瓷以外的玻璃或陶瓷中包含铅的电和电子组件,例如压电设备,或在玻璃或陶瓷基质中。

Dimensions

Width

N/A。65毫米

Thickness

N/A。26 mm

Special Length (L)

N/A。225 mm268毫米314毫米358 mm403 mm446 mm492毫米

Design Consideration

Power In

N/A。单面正(+)和负( - )输入

Wiring

N/A。Can be connected to power directly
需要定制

标准帧

N/A。Available

限制

N/A。≤15 A≤1800 Watts

Suitable Applications

N/A。
  • Most suitable for applications where power connection is fixed on a single side.
  • Better vibration endurance for automotive. Prevents loose connection or poor contact between terminals. Reduces the possibility of oxidation of connection points between male and female terminals causing increase in resistance leading to overheated joints and vibration failure.
  • Additional silicon seal can be added for applications located in high humidity environments. Effectively increases the life-span of the PTC.

Heater Type

N/A。Positive Temperature Coefficient (PTC)

Voltage Selection

N/A。
  • Standard voltages: 100V~120V and 200V~240V
  • For all other voltage range requirements, please contact us for additional information.

应用Note for Voltage Selection

N/A。
  • Under constant airflow, increase in voltage will have little effect on the heater power.

正温系数(PTC)功率(W)和空气流量/空气速度注意事项

N/A。
  • 高空速度与高热量耗散速率相关,这会导致更高的功率和周围温度更快的升高。
  • Under low air speed, heater power will decrease, however the temperature at the air outlet will be high.
  • 在没有气流的情况下,PTC Fins的表面将接近Curie温度。加热器功率可能会降至正常功率的1/20(以6.4 m/s的空气速度),并在恒定温度下稳定。

应用Note for Positive Temperature Coefficient (PTC) Power (W) and Air Flow/Air Speed Considerations

N/A。
  • The power of PTC heaters is related to the ambient thermal condition and the heat dissipation rate of the heater. When the ambient temperature is significantly higher than the reference temperature or when heat transfer is restricted, the resistance of the PTC will rise rapidly and power consumption reduces. Hence, the higher the heat dissipation, the higher the output power.
  • The surface temperature of PTC is self regulated. The lower the surface temperature, the lower the power.
  • MH和MSH型FIN PTC空气加热器允许三个阶段温度设置(高,中,低)。可以独立控制PTC加热器管(请参阅“安装”部分以获取电路连接),有效地降低了电力成本并增加了产品寿命。如果此功能与空气速度调节(风扇)结合使用,则可以在调节气流和温度方面更灵活。

阳性温度系数(PTC)鳍螺距选择

N/A。
  • Unique Fin PTC pitch range provides a diverse choice of high efficiency vs low air resistance (lower noise level). Choices from 1.2 mm to 2.6 mm are available for various application selections.
    • Ultra-high-heating-efficiency Fin Pitch: 1.2 mm (S), 1.68 mm (M) Larger heat dissipation area; higher output power; higher temperature at the air outlet.
    • 超低空气电阻(较低的噪声水平)鳍螺距:2.0 mm(n),2.6毫米(b)减少散热面积;进一步加热;降低输出功率。
  • The Power (W) in the Specifications tables is based on Fin PTC Air Heaters with extra-high efficiency fin pitches. Fin pitch 1.68 mm (M) for MSH, SH and OH models, and fin pitch 1.2 mm (S) for MH model.
  • The Power (W) of Fin PTC Air Heater with fin pitch 2.0 mm (N) is 95% of Fin PTC Air Heater with fin pitch 1.2 mm (S).
  • Fin Pitch 2.6 mm(B)的Fin PTC空气加热器的功率(W)为鳍PTC空气加热器的90%,鳍螺距1.2毫米(S)。
  • The Power (W) of PFin PTC Air Heater with fin pitch 2.6 mm (B) is 90% of Fin PTC Air Heater with fin pitch 1.68 mm (M).

阳性温度系数(PTC)绝缘考虑(隔热倍增 - 电气绝缘加热器)

N/A。
  • The Power (W) in the "Standard" tables is based on Fin PTC Air Heaters with Single Insulation (S).
  • The Power (W) of Fin PTC Air Heaters with double insulation (D) is approximately 10% less than Fin PTC Air Heater with single insulation (S).
  • The price of Fin PTC Air Heaters with double insulation (D) is 15~30% more than single insulation (S) Fin PTC Air Heaters.
  • 双绝缘鳍PTC空气加热器设计用于在需要电气隔热的加热器外部(FINS)的情况下使用。
  • 两个都single insulated and glued typed Fin PTC Air Heaters are not electrically insulated on the heater exterior/fins, hence carrying input voltage.
  • The Fin PTC heating elements of double insulated Fin PTC Air Heaters are completely insulated within the aluminum tubes, allowing complete electric insulation on the heater exterior (fins).

应用Note for Positive Temperature Coefficient (PTC) Insulation Consideration (Doubled Insulation - Electrically Insulated Heater)

N/A。
  • The fins on Fin PTC Air Heaters with Double Insulation (D) are electrically insulated. This is suitable for applications where the device may be in contact with other conductive materials (eg. metal); expose to high humidity; with shock resistance requirement; or in products that require superior stability and quality (eg. automobiles).
  • 由于其高安全性和可靠性性能,双隔热的FIN PTC空气加热器主要由汽车,电动汽车,在冷/暖空调器,风扇加热器,消毒柜,烘干机等的大型房屋加热器中使用。

Overview

Overview

N/A。金宝搏官网mgPelonis技术' innovative Fin PTC Air Heaters are significantly more efficient than coil or conventional heaters and create a very effective heat transfer in a small space.

Positive Temperature Coefficient (PTC) Characteristics

Positive Temperature Coefficient (PTC) Characteristics

N/A。FIN PTC空气加热器have self-regulating characteristics and will not overheat. This results in better conductivity, greater operating efficiency, a stable electronic response, and longer life expectancy.

创新功能

创新功能

N/A。
  • 可用的设计包括非常低的空气阻力和高加热效率。
  • Internal safety-fuse protection; auto-cut-off to prevent abnormal high current or other external factors causing safety concerns.
  • 快速热响应时间和低液电流;不会通过即时/突然的电源变化引起火花或火焰,或者与易燃物体接触,包括火柴,棉花,纸张等。
  • 使用单个或双隔热材料设计;与金属物体接触时,不会引起电击或短路。
  • Double insulated PTC can be used underwater without causing electricity leakage or short circuit (customized).
  • 允许独立控制单个PTC(500W,800W),双PTC(1000W,1500W)或三重PTC(1500W,2000W)加热管;降低电力成本并延长产品寿命。
  • The poles and terminals are connected by point welding, thereby preventing the electrodes from loosening and causing resistance and temperature to increase due to cold contraction or heat inflation.
  • 加热部件紧密密封,电极未暴露,这使FIN PTC空气加热器适合在浴室或高湿度环境中应用。
  • Long service life; do not crack, burst, or burn even when heated under no airflow conditions.
  • No moving parts to wear out.
  • Voltage change does not affect its current and output power (insensitive to unstable voltage).
  • The surface temperature of the PTC pellets does not change while power regulates with ambient temperature and heat dissipation rate. Therefore, the higher the environmental temperature, the greater the power efficiency.
  • Heating power (W) and self-regulating function is in correlation to the heat dissipation rate.

Added Protection

Added Protection

N/A。The internal heating elements are fully cladded in a sturdy aluminum structure in order to reduce exposure to air and to withstand high levels of humidity and vibration. This method of protection also prevents loosening of the individual heating pellets and eliminates oxidation which can lead to eventual power reduction and shorter life expectancy.

定制解决方案

定制解决方案

N/A。FIN PTC空气加热器可以根据客户需求提供各种尺寸,还可以配置外部框架,恒温器,保险丝,轴向冷却风扇和防护罩,以提供完整的单源组件解决方案。金宝搏188是什么公司188体育在线官方188d金宝搏的网址

Applications

Applications

N/A。FIN PTC空气加热器can be used in automotive (electric vehicles) and other applications for heating, dehumidifying, and thermal retention or in general electronic appliances including hand dryers, air conditioners, irons, laminating machines, and adhesive sealing machines. Additional applications include freeze protection of outdoor surveillance cameras, 3C products, and other electronic devices.

附加信息

附加信息

N/A。空气标准鳍PTC加热器的设计与罪gle stage heating (full power). However, SH type Fin PTC Air Heaters can be designed with multiple power stages by heating one or two tubes at a time. This makes them more economical through power saving and will also help extend heater life expectancy. If multiple stage heating is required in an application design, please contact our Sales Representatives in advance for special design and wiring.

Note

Note

N/A。
  • 规格表中的功率(W)基于单个绝缘层和鳍螺距为1.68 mm(m)或2.6 mm(b)的FIN PTC空气加热器。FIN PTC空气加热器的功率(W)为2.6毫米(B)的功率是鳍PTC空气加热器的90%,鳍PIN螺距1.68毫米(m)。请参阅有关零件编号的注释,以获取每种鳍螺距类型和绝缘类型的功率(W)效率的差异。
  • Customized wattage, length and specifications can also be designed for large quantities.
    Baidu