Brands |
N/APelonis Technologies |
Model |
N/A44 |
Ratio |
N/A4 |
Output Bearing |
N/ASolid Output Shaft (No Keyway) |
Stage |
N/A1-Stage |
Rated Output Torque (Nominal Output Torque) (T2N) |
N/A15 N·m |
Maximum Acceleration Torque (T2B) |
N/A1.8 Times of Rated Output Torque |
Maximum Output Torque (Emergency Stop Torque) (T2NOT) |
N/A3 Times of Rated Output Torque |
Rated Input Speed (n1N) |
N/A3000 rpm |
Maximum Input Speed (n1B) |
N/A6000 rpm |
Backlash |
N/A≤ 10 arc·min |
Torsional Rigidity |
N/A3 N·m/arc·min |
Maximum Radial Force (F2rB) |
N/A360 N |
Maximum Axial Force (F2aB) |
N/A180 N |
S5 Cycle Operation Service Life (LH) |
N/A>30000 hours |
S1 Continuous Operation Service Life (LH) |
N/A>15000 hours |
Efficiency (η) |
N/A≥95% |
Operating Temperature |
N/A-25 to +90 ºC |
Lubrication |
N/ASynthetic Grease |
Protection Class |
N/AIngress Protection (IP65) |
Mounting Position |
N/AAny |
Noise Level |
N/A≤ 65 dB |
Weight |
N/A1.2 kg |
Weight Tolerance (±) |
N/A3 % |
Mass Moments of Inertia |
N/A0.09 kg·cm² |
Flange Model |
N/A44 |
Dimension A1 |
N/A50 mm |
Dimension A2 |
N/A4.5 mm |
Dimension A3 |
N/A13 mm |
Dimension A4 |
N/A35 mm |
Dimension A5 |
N/A5 mm |
Dimension A6 |
N/AM4 x P0.7 |
Dimension A7 |
N/A5 mm |
Dimension A8 |
N/A15 mm |
Dimension B1 |
N/A44 mm |
Dimension B2 |
N/A26 mm |
Dimension B3 |
N/A5 mm |
Dimension B4 |
N/A15 mm |
Dimension B5 |
N/A20 mm |
Dimension B6 |
N/A5 mm |
Dimension B7 |
N/A67.5 mm |
Dimension B8 |
N/A99.5 mm |
Dimension B9 |
N/A125.5 mm |
Dimension C1 |
N/A46 mm60 mm63 mm |
Dimension C2 |
N/AM3M4M5 |
Dimension C3 |
N/A8 mm11 mm |
Dimension C4 |
N/A26 mm |
Dimension C5 |
N/A30 mm40 mm50 mm |
Dimension C6 |
N/AM4 x P0.7 |
Dimension C7 |
N/A42 mm |
Dimension C8 |
N/A57 mm |
Dimension C9 |
N/A82 mm |
Dimension D1 |
N/A48 mm |
Features |
N/ASpiral Bevel Gear The grinding spiral bevel gear has a compact structure and is excellent in transmission efficiency, stability, and durability. It has a large arc overlapping factor, is wear resistant, and has a long service life. Integrated Planetary Arm Bracket 行星臂架和输出shaft are one-piece constructed to increase torsional rigidity and accuracy. Full Needle Roller Bearings Design The planetary gear transmission employs full needle roller bearings without a retainer to increase the contact surface. This greatly improves structural rigidity and service life. Collet Locking Mechanism The input-end and the motor are coupled through a collet locking mechanism. The mechanism is dynamically balanced to ensure concentricity and balance on the connection and has no backlash for power transmission while running at a high speed. One-piece Helical Gear Box The gear box and internal ring are a one-piece construction design. The speed reduction mechanism employs helical gears that provide two times the meshing rate of teeth compared to regular spur gears. It operates very smoothly, has low noise, high output torque, and low backlash. |